Other Security Subjects

Hi all i have the following problemi have 2600 Router with IOS Ids , and i have configured and Ip Audit on one Interface, but the problem is that in this interface i have 3 Networks configured . For example :Interface Ethernet0/1 ip address 10.0.0.1 ...

In S37 there are 2 signatures that do not allow for blocking. As a matter of fact they allow for no actions to be taken on the signature at all.I am administring the appliance sensors via the web interface. Has anyone else experienced this issue or...

I have an Exchange server (that is a Backup Domain Controller) that it on the outside of the PIX we had a AD machine along side it for a while. I've moved the AD server to the inside. Now I need to talk to the BDC, and have it respond to the AD on th...

I have 4 sensors.. one of them had it's packetd icon disappear from the usual OpenView icons (i.e. packetd, postofficed, etc etc). This is under the Unix Director.I checked, and packetd *is* running and snoop is working.Any ideas out there? I repost...

Hi,I would like to know which size theinternal SCSI HDD in the IDS-4235 is.THX,Markus

I started using conduits. and I keep seeing others using ACL, I think I read somewhere you are not really suppose to mix the two.What are the +'s and -'s of each?Thanks, Scott<-

Hello,In reviewing a sample config for internal mail access I cam upon some questions.http://www.cisco.com/warp/customer/110/mailserver_in.htmlThe example in this config shows the outside interface with an address of 209.164.3.1 and the mail server t...

how to close finger in the early ios which doesnt support the command?thx a lot

K newbie here. I'm trying the deny everything approach. Thing is I'm not sure what all I should deny. My main goal is to block spyware such as Kazaa, Limewire and whatnot also porn dailers. I need to let through IM's though as we are an internet cafe...

Sir, I would like to know about the DB60 [DTE] / DB60 [DCE] connector pin point specifications. The cable which I am having does not contain the pins 16 and 52, whether it will create any problems. please send me the pin specifications as early as ...

My users at an office running behind a 501e are using Terminal Services to connect to a server across a vpn. The VPN is setup between a 501e and a 515e.Both PIX's have the following timeout settings:timeout xlate 8:00:00timeout conn 7:00:00 half-clo...

I now know that the VPN3002 doesn't support LAN to LAN sessions. This causes a major problem for my customer when the session times out, as they cannot establish the session from the 3030 end. The user PC on the VPN3002 site has to establish the s...

Have IOS 12.2(2)T running on Cisco 2610. Need Firewall Feature Set. Is there any way to upgrade without buying another fully flegded IOS release (as my resseller insists that it's the only way to go)?Thanks.Joe P.