I need to activate evaluation license in router ISR4221.i read that i don't need to request the evaluation license, because it's just in the router and the only thing i have to do is activate it.but i want to know, all equipment comes with the evalua...
Forum Posts
I need help with buying the above model and all the necessities to host 4 WAN links - 3 x 100Mbps WAN and 1 x 1Gbps WAN Data sheet shows built in Gigabit ethernet ports - 6 gigabit ethernet SFP pluggable ports. So I don't have to buy any other module...
I have a video streaming device that needs to be in the DMZ. the problem is that the device must be close to the streaming equipment, which is in another building than the DMZ. It is using RTP (UDP) 5004. I would like interface GI9/47 on SwitchB to b...
I have a single local vlan created on my cisco 3650 under which i have connected my local machines.Also, i have many vrf's created and connecting to PE via BGP.the routes learned by BGP are different for each VRF. i have forwarded local vlan to one v...
Hi all,My company has a couple of branch offices that are not connected to our headquarters. Our current plan/goal is to connect all offices with HQ over VPN connection. We want to have just one main firewall over which all other offices will go out ...
Hello, I´m Ezequiel and I need to know the real performance of the ISR4431 and 4451, because we need to encrypt one link of 1 Gbps with AES 256 SHA, also it must support OSPF and BGP.Thanks in advanceEzequiel
Dear All, Please find the attach topology FYR, 1) i am not able to receive R2 network (20.20.20.0 ) to R3 router 2) i am not able to receive R3 Network ( 10.10.10.0 ) to R2Both network are receive on R1 R1 having bgp AS 1R2 & R3 having bgp as 65000 ...
Hello Experts, I have a network (hub connected to 9 branch office).We are considering changing out lan side of the network from 172.31.xx.xx to 10.190.xx.xx to accommodate a business merger. The issue is our wan side ip address is 10.30.xx.xx.Changes...
All, I have an Issue where I have a network 192.168.1.0/24 needs to have static NAT for two devices and NAT overload for the remainder. The static NAT's are working but the Overload is not.......The public IP's below are hidden but highlighted in OR...
Hi experts, we got a CSR1000v to use on the CSP 2100 platform. The interfaces got added as gigabit interfaces. Is there any version or category of the CSR1000v that comes with the 10g ports? Thnx
Hi, We are looking to replace around 30 2921 routers. These currently have a 48 port modules installed and are very heavy. They are installed in plastic rolling gator cases and are pulled back and forth weekly. The duties of these mobile cases has sh...
Hi,I've got a network set up in a hierarchical design and want to get the PCs on the access layer to be able to ping the routers at the core layer. Currently they can all ping each other, within and outside their VLANs, but cannot ping any further th...
Hi,I've been trying to setup inter vlan routing using a multilayer switch, however I'm having some trouble getting it working.I've followed a couple of tutorials I've read online but still can't get it to work. It will ping within the same vlan, but ...
Hi all, PS: I am usingEVE-NG version: 2.0.3-59QEMU version: 2.4.0Cisco IOL 15.4 (cf.EVE_ROUTER file attached)I am trying to build a flexvpn dual hub dual cloud architecture with BGP as the overlay routing protocol.- Primary Hub (server) is RT-Auber (...
Hi All I got a question about the cisco 4431, is it possible for this device to handle a High Availability (active-stanby) configuration between two WAN or MPLS links? I'm a little confuse if the device needs the VIPTELA or DNA license or it doesn't ...
