hi When using command "show ip route", there are a lot output. I do not want to check one by one. I want to know if there is command which can directly show how many routes the router has without checking the number, Do we have this command? Thank yo...
Currently I have 2 MPLS of the same provider, MPLS A 40M and MPLS B 20M. I have a few VLAN for different purpose, VLAN 10, 20, 30, 40, 50 for infrastructure(and normal users) and VLAN 60 for VIP users. My intention here is to use the 40M for infras...
What I have: I have two ISPs and I want to load-balance between both providers. I have two ASA 5525X and two ISR4431 routers. I have an ASN already with a /24 address space. What I want to do: Use all equipment and load balance out of both ISPs to ...
hi all,got an alarm on one of our core 3945 router.is this for RMA? is for the 1x fan or whole chassis? Aug 4 01:06:43.262 UTC: %ENVMON-4-ONE_FAN_LOW_RPM: Warning: Fan 2 is running at low RPM. Rotation speed is now high for all other fans. Fan Tra...
I might sound funny but I'm very confused about TTL value in ping. Lets say if I ping my Cisco firewall from my PC below is the result. ping 172.16.1.254 PING 172.16.1.254 (172.16.1.254): 56 data bytes 64 bytes from 172.16.1.254: icmp_seq=0 ttl=2...
Assume the IGP (R1-R2-R3) was formed by a corporate merger. In detail, come up with a conversion plan to route the environment with only one interior protocol. Include the configuration commands/changes you would need to make. I have been trying to ...
Hi All I have a router connected to 2 ISP's and I need to run BGP to each of them, but with separate source AS per connection on my side. Would this mean I would need to set up 2 separate BGP processes on my router? cheers
We recently acquired a new PTP service upgrade (ethernet) . We are still using our old one PTP 1.5mb connection on our serial interface. I purchased and installed the new GB ethernet interface to compensate for the increase in bandwidth provided by t...
Hi All, I am looking for a way to get the configured BW policy for a VLAN. Let me take an example of below configuration. I have a VLAN configured with service police 30Mbps. Like wise there are 100 VLANs in the router, need to get the configured...
I have two Layer3 switch, and configure as HSRP. I configure DHCP server on this two switches to provide IP for the same LAN. These two DHCP servers have conflict MAC address. How can i get rid of this problem? Can i configure DHCP server with priori...
Log: Spoiler*Dec 12 05:25:39.015: %BGP-3-NOTIFICATION: sent to neighbor 10.99.142.93 4/0 (hold time expired) 0 bytes*Dec 12 05:25:39.015: %BGP-5-NBR_RESET: Neighbor 10.99.142.93 reset (BGP Notification sent)*Dec 12 05:25:39.015: %BGP-5-ADJCHANGE: nei...
Hi Eveyone, I have a Spoke site running IWAN which has very uneven upstream transport bandwidth.. So for example, 1x DSL (MPLS) - 400 Kbps UP, 5 Mbps DOWN. (Preferred Private Circuit) 1x 4G (INET) - 10 Mbps UP, 25 Mbps DOWN. IWAN is behaving as...
9504 # 1 HSRP Active Standby did not change when port 1/1 was not connectedPlease tell me why. ----------------------------------------------- 9504#1 track 2 interface ethernet 1/1 line-protocol interface vlan 20 hsrp 2 preempt priority 110 timers ...
Hi, I'm trying to simulate a PPPoE Server-SOHO Clients network in my lab and I can't make it to work. I'm not sure if I am missing something, so I badly need your help. Here's the setup: Cisco 2600 router is to be configured as PPPoE Server. One ...
Hello guys, I have tried to search forum about my problem, but it was all confusing. I couldn't figure out solution to my problems. I hope you can help me.At one costumer I have 2811 routers with very old IOSes, (c2800nm-advipservicesk9-mz.124-3i.bin...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 06-14-2025 01:24 AM | ||
| 05-15-2025 07:28 AM | ||
| 05-13-2025 03:49 AM | ||
| 05-12-2025 03:28 PM | ||
| 05-09-2025 02:25 PM |
| User | Count |
|---|---|
| 8 | |
| 5 | |
| 2 | |
| 2 | |
| 2 |
