Routing

Hello Cisco Forum,once again I come to ask for advice.(We run EIGRP on a Hub&Spoke network with two ISPs providing a mixture of connections to around 30 spoke sites.There are two central routers with IPSEC/GRE tunnels to all sites, one primary and on...

Hello,i'm looking for an Access Router to connect sites with up to 1Gbit over an Fibre Ethernet Link to a central access Router. The LAN site will be connected over a 802.1q trunk to an (non) cisco switch and there will be four IP-Adresses on four su...

can some body know which IOS in cisco 2651 have features of bgp asnotation dot . This command is unavailabe

Hi i want to read the configuration stored in cisco router without using puTTY or hyper terminal (serial interface) purely using C# and retrieve the configuration files. is this possible?

Hi Experts,I have need to know few things. 1. I have 2 ISP's and want to use both the ISP on same time. ISP1 (5 MBPS ) ISP2 (10 MBPS ) so can I use both the ISP at same time and there is any chance to use load balancing as well ? Both the ISP is dif...

Hi all,I am currently working on some DVR issue. The objective is to allow internet users to access DVR by port forwarding (using http://12.12.12.12:8888).However, I am facing some issues First of all, I tried with this below config. With this config...

I have a gigabit connection between two building that involves a 60GHz radio link and is routed through an additional building with a fiber converter.We now have a direct fiber connection between the two buildings and I would like to retain the older...

Dear Friends,We are planning to configure  BGP conditional advertisement at our Network.I would like to share with you the idea behind that.We have 4 UP Links , we are advertise our prefixes to them identical on all of Links.So what is the best pract...

Hi,Can any one help me please?I have this error on my equipment and i don't know what is that.Any one knows?Error:Aug 21 11:48:34.001 PT: ErrI2CRx: BD=0xA000, ER=0x0000Aug 21 11:48:43.935 PT: ErrI2CRx: BD=0xA000, ER=0x0000Aug 21 11:48:53.436 PT: ErrI...

Can 2911 ISR-G2 router support to deliver internet service for 350Mbps ? what is the maximum bandwidth can handle by this 2900 ?

I am having issues trying to create a cellular data profile, it is not the command that is the problem, but i choose to overwrite a profile it says "profile # NOT written to modem"I did a debug on the cellular interface when adding a profile, and i g...

Greetings!Here is an except from the Cisco Press I am using to study:"The BGP synchronization rule, which states that a BGP router should not use, or advertise to an external neighbor, a route learned by IBGP, unless that route is local or is learned...