Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

“Webinar

 
Labels

Forum Posts

hi everyone,I am very new to cisco router; however, i have a big challenge.I am using server 2008 as dhcp server.yep i got ip helper-address 192.168.1.10 to work.but now i can't get this port forwarding working.. i am trying to use 17501 as a worksta...

jongbeomk by Level 1
  • 1224 Views
  • 4 replies
  • 0 Helpful votes

When I plug the T1 into the serial interface on the router, I am able to ping the ISP gateway.  However, none of my LAN users can get out.  Is there something with my NAT configuration?  Any advice would be helpful.interface FastEthernet0/0 descripti...

       Hi        I have one new  cisco 2921 router but after first login into the new router . I have made some configuration but forget to change the default password . Now i am unable to login into the router after first log off but iam not able to...

Hi Expertscouple of BGP Questions1)when we use the BGP Hidden command : BGP Multipath as-path relax ,then the attribute Local Preference no longer important?2)is the hidden command "BGP Multipath as-path relax" didnt work without the command maximun-...

Hello,I have two cisco 2811 (Version 15.1(4)M3) connected using cross-over cable with two PCs connected on the outside interfaces (Windows 7 - firewall disabled).PC1<-----Rj-45------>Fa0/0(R1)Fa0/1<---cross-over------->F0/1(R2)Fa0/0<-------------Rj-4...

Jedi:In my example listed below, two IOS routers (R1 Fa0/1 IP:192.168.100.1/24 <----> R2 Fa0/1 IP:192.168.200.2/24) are directly connected.The FPM service policy is applied to R1's Fa0/1 interface in the inbound direction.Using FPM, I am trying to dr...

ugot2nome by Level 1
  • 701 Views
  • 1 replies
  • 0 Helpful votes

Resolved! time based policy

Dear All, I have configured policies to shape the traffic on the interface of cisco 7206 router. Now my managemet wants to configure these policies on time based ie policy should be applicable during specified time period onle. Is it possible? if yes...

apkothiyal by Level 1
  • 4749 Views
  • 11 replies
  • 0 Helpful votes

Hi dears.that error give my supervisor at each 10 minute. i copy here some part.443C4BA8:        0        0        0        0        0        0        00443C4BC8:        0        0        0        0        0        0        00443C4BE8:        0      ...

HiI am thinking of deployed the 1941 and am looking for a version of IOS ip  base that supportsvrf aware DHCP server.I have looked on the Cisco web site and I can't seem to find this feature although I am fairly sure that it is supported.Any idea?Reg...

pbelletty by Level 1
  • 1060 Views
  • 0 replies
  • 0 Helpful votes

Ive been trying to figure out what is wrong with this MGX8950 for a while now, it keeps repeating the following....(i attached a longer file)Also, Ive tried 4 different PXM-HD backcards and 3 different PXM 45/C. I even went as far as dismounting all ...

aczwicker by Level 1
  • 604 Views
  • 1 replies
  • 0 Helpful votes

Dear all,I have a SIM card which can support 3G internet access, that is I can use notebook to access internet via 3GNotebook(WiFi) -->WiFi (Mobile phone) 3G --> internet.  --- (Remark: username and password is not require)When I use this sim card to...

acbennyma by Level 1
  • 1733 Views
  • 1 replies
  • 0 Helpful votes
Unanswered Topics
Review Cisco Networking for a $25 gift card