Routing

hello friends,i attended some technical interveiws and everytime i faced one question that why to use BGP when we have good protocols like OSPF or EIGRP?really guys, i used to give answers but from my side i never satisfy with exact answer and also i...

hi All,We have observed below logs on one of our customers.dsxpnm_gt96k_abort_rx_mpsc:Aborting Rx mpsc faileddsxpnm_gt96k_abort_rx_mpsc:Aborting Rx mpsc faileddsxpnm_gt96k_abort_rx_mpsc:Aborting Rx mpsc faileddsxpnm_gt96k_abort_rx_mpsc:Aborting Rx mp...

Hi, I have a one "white" IP: XX.XX.XX.74, gatweway XX.XX.XX.73, mask - 252,and adittionaly 16 "white" IP XX.XX.XX.80/28 routing in provider on my IP (.74).I Setup my WRV200 as:"WAN side" Static IP: XX.XX.XX.74         gatweway:  XX.XX.XX.73  mask  - ...

HelloI have a customer needs continues  internet connection just for browsing issue coz its important to him(in the past his ISP goes down for 6 hours,so it was panic to him that moment coz he lost a lot of money in the stock exchange), along with ex...

Dear Experts,I expect your help by giving clue how to achieve the traffic as described below: (Also find the attached Diagram)It is a Hub & Spoke topology. Branch office-1 is able to communicate with Branch office -2 thru Hub Router. Now I want to ch...

Hi All,          I have a problem with Router 1841 on software version 12.4(13r) T, After reboot system I cannot access to CLI.The attached file is capture screen during turn on my device.Thank you.

I have two sites connect to an MPLS network through two different POPS  POP C and POP DSite A redistributes a static route pointing to a vendor router at that locationSite B redistributes a static route pointing to a vendor router at that location.Bo...

I ordered 2 E1's (4M total) from an ISP in Amman Jordan (Zain) and the only interface they supply is BNC.  How do I interface with this?   Does the NM-1T3/E3 do 4M subrate?

Dears,just want to ask about the currently available E1 modules for 3745 router as NM-2CE1T1-PRI module no more available in market.. what is the alternatives???Thnx

Hello,I'm in a jam and was wondering if someone would be able to help me with configuring a 2621XM to replace our existing router?  My ISP has provided the following information:"looks like we are routing to the public block below. So you just need t...

In my company's corporate LAN, the servers are located on a seperate VLAN. We are using a multilayer switch Catalyst 3560G. I have concern on how to secure the servers beyond the default security provided by the switch.I witnessed a demonstration, wh...

hellodiagramR1 ----------R2R1int s0/1ip add 1.1.1.1 255.255.255.0ip add 1.1.1.5 255.255.255.0 secRouter ospf 1net 0.0.0.0 255.255.255.255 a 0R2int s0/1ip add 1.1.1.2 255.255.255.0ip add 1.1.1.6 255.255.255.0 secRouter ospf 1net 0.0.0.0 255.255.255.25...

Hi friends,I have been working with MGX for the last two to three months. but still i cant be clear about why do we require MGX? Are there any special features in those switches which other equipments do not support? What I mean is, the MGX are very ...