How is the value of SRTT derived for the "sh ip eigrp nei" command?
How is the value of SRTT derived for the "sh ip eigrp nei" command?
Does any one know if there is any NBAR performance test report for ASR? And also 6509? I found one but it did not mention ASR or 6509. http://www.cisco.com/en/US/technologies/tk543/tk759/technologies_white_paper0900aecd8031b712_ps6616_Products_White_...
Hi,I wonder if anyone tested the performance on the Cisco Router 2621.I need the numbers for...1. Routing performance2. IPSEC VPN (3Des)performance3. GRE performance
WE HAVE 1841 ROUTER WHICH HAS RF LINK AND SERIAL LINK CONNECTED IN EIGRP NETWORK. WE WANT ISDN BACKUP ONLY WHEN BOTH LINKS WERE GOING DOWN. IF ONE LINK FAILS ISDN SHOULD NOT FIRE.
Hi,I am using XR 3.6. When I sh ip route from router A to directly connected router, router B,(using loopback address), I will get route metric 65536. Thus makes this link is not prefered (as it has another path to router B).Its connected thru FastEt...
This request is urgent;Kindly tell me the cisco router that has Fibre slot.ThanksYS
Hi.I am trying to configure a Cisco837 via CRWS. The router had an old configuration so I entered to the CRWS and reseted it to the factory defaults. After it reloaded and I tried to enter again, the router asked me a level_15_access user and passwor...
Please see the capture below:HTKINGS2#sh verCisco IOS Software, C3750 Software (C3750-IPBASE-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1)Copyright (c) 1986-2007 by Cisco Systems, Inc.Compiled Thu 19-Jul-07 19:15 by nachenImage text-base: 0x0000300...
Question.if we give sh mac-addess-table command we will find somewht this output in switch VLAN Mac Address Type Ports IF there is any mac address connected to a port and VLAN and but I want the mac-address should look in the way i...
We need connect our two data centers to 3 other remote sites via two ISPs MPLS WAN. Each ISP pipe will be running 200Mbps. Basically we have 4 classes of traffic, Email, Images, VOIP/Vedio and Others. Email and Images are heavy traffic. which of the ...
Hi Cisco Experts,I would appreciate it if somebody could confirm if I am correct in what I say here.I have Area0 which is connected to Area1 and Area2. Area1 and Area2 are not connected to each other.- Area1 has two ABRs to Area0, abr_A & abr_B - the...
All,Would EIGRP SIA trigger a floating static route to kick in??Thx.
On which IOS version for the 4500 series is WCCP with GRE possible?We have sup IV and sup 6-E.
Hello,Have a situation where I will potentially have a 200MB WAN link coming in to my Core (Cat4006) switch. I am looking at simply placing a 2821 series router with GigE capable interfaces to support this incoming traffic. My 4006 switching module d...
I know that equipment router 3845, 3750, 1841 lists 110V-240V range.I got a UPS which delivers 208V output. I do not have money to buy transformer.If I provide a power strip connected to the UPS, then I get the cable which fits into the power strip (...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 12-04-2025 05:46 PM | ||
| 12-04-2025 12:04 PM | ||
| 12-04-2025 08:01 AM | ||
| 12-03-2025 07:46 AM | ||
| 11-13-2025 04:57 PM |
| User | Count |
|---|---|
| 10 | |
| 6 | |
| 5 | |
| 4 | |
| 4 |