Routing

Quick question, I'm wondering if there is an equiv. card for a 7200 series router:1-Port Channelized OC-12/STM-4 to DS0 OSM

I don't know the password configured in a Cisco MDS 9124 Fabric Switch. How can I do a password recovery?Thanks,Ana

I currently have a 3745 router that I am going to be repurposing and its running the 12.3(6r) rommon. I'm seeing in the download section that the 12.2(8r)T is available and the document @ http://www.cisco.com/en/US/docs/routers/access/2600/hardware/...

Will a 3650-E run BGP? If not, what's the smallest L3 switch I can get that does support it?Thanks!!

users complain they are unable to telnet to desired devices in the private network when I add a new ipsec vpn tunnel. CSCdz46552 seems to address my issue. I'm currently running 1700-k9o3sy7-mz.122-8.t10 on a 1721 router w/8/32mg of mem. Any suggest...

We're having a hard time getting floating static routes to work. We use the floating static route technique to utilize a VPN connection as a backup connection to our branch sites. When all that was involved was OSPF we didn't have a problem. Recen...

Hi,This is the picture: CE -- PE. Voice and Data comms are taking place here. The QoS appears to be working propperly but when there is a big load of traffic the ATM interface of the CE starts lossing packets, quality of the Voice calls gets degrade....

whether policy based routing is possible or not on 3750 switch.

All,I'm setting up a basic PIM-SM w/ Autorp to provide multicast to a new WAN connection. The RPs are two 4500s that act as the L3 core of the network. They have a few multicast sources directly connected to L3 interfaces.I have a new 7206 router t...

is there any restrictions for cisco 7206vxr router regarding stm module?how many stm module can be install in cisco 7206 router chassie?

Dear sir,one of my customer is looking for 24 10/100 RJ-45 ports and two combo ports . combo ports consists of two additional 10/100/1000 RJ-45 and two Gigabit SFP.plz suggets me this requirement cisco having the combo ports and which model .regardss...

Imagine you have a new site on a remote area, no fiber or other telco services were ever explored.If you order and get a T-3 installed, does it require the telco company to dig and install optical fiber there as well? I know that if you require a 'fi...

Experts ,Our ISP has provided with a sample configuration to setup a point to point Multilink T1 connection btw two office's.controller T1 0/0framing esfclock source line primarylinecode b8zschannel-group 0 timeslots 1-24 speed 64!controller T1 0/1fr...