Routing

Hi allCan someone tell me why I coulnd't put those keywords "DHCP" and "track", on the same route. I must use an interface route because my ISP's address are assign dynamically.Thanks

I am working on integrating two company networks. An interim soln, due to ip address collision, would require doing Static NAT, Dynamic NAT & NO-NAT. Network A to Server Farm - Static NATNetwork B to Server Farm - DynamicNetwork C to Server Farm - NO...

Hi Guys,This question has been bugging me for a while.. Does anyone know if cisco will bring out an IOS which support incoming and outgoing bandwidth statements on the same interface?Working with ADSL you really only have 2 choices, set it to either ...

Hi Anybody can tell me what is difference between MPLS L3 vpn and MPls L2vpnPlease let me know good document for the same.-V

We have recently moved a large client from a flat network structure at each site ( more than 30 total sites) and an unstructured routing plan from edge to core. They now have a structured WAN that coincides with their LAN Structure. Since we comple...

Hello,Can anyone tell me if the following is possible?I have an 1801 router connected via ADSL to my service provider. My ISP has provided me with 8 IP addresses (xx.xx.xxx.168/29). The LAN interface connects to a Watchguard Firebox firewall. The ...

Hi,I understand that Cisco 7206 series routers are modular and require to verify the bandwidth point whenever you wanna add in a module card...Currently, I have a Cisco 3640 series router..Does it have this restriction for bandwidth point or is there...

Hi,Was wondering if I could get some ideas on what would be the optimum way of loadbalancing outgoing browsing traffic across 4 outgoing DSL links that are terminated on a single router. Bear in mind that these links are capped so I need a way of rem...

Hi all!We have a problem with a cisco 871.If all ports of the integrated switch have no link, the vlan gones down and it is not longer possible to access the lan-IP from the WAN. How can we force the VLAN up ?

Hello all, I have a 3mb circuit with AT&T using a Cisco 2800 router...Managed by AT&T...I have 16 statics provided to me by them and use NAT to forward them to my 10.10.0.0,255.255 network...The problem is as follows...I have a user on my network wit...

Hi allIf I have 2 router connected over a T1 line over 2 site for example and both have become OSPF neighbor.Eg. If the link connecting to Router A flap and loss it connectivity for a short period before it resume connectivity and OSPF neighbor again...

We have two offices. My office has two T1 connections to the Internet. I've ordered Point-to-Point T1 (just the T1 port without Internet connection) to connect our other office to us and to the Internet.I would like to subnet our class C IP like belo...

Our client has installed Microsoft Vista,But this Pc is sending now 2000 packets/sec over the lan as type "ICMPv6 Multicast listener Report Message v2".What can we do as action on our Cisco switches ???regards