Routing

Hi,I'm trying to add on to an existing VPN between a cisco ASA5510 and a PIX 501. Currently, the vpn is working and traffic from vlan 10 on the asa box can communicate with traffic on the pix box, and vice versa. However, I also need the traffic on...

Hello, I have 3 conections to my ISP. All of them are frame relay (E1), my problem is:I configure as follow:interface FastEthernet0/0ip address 10.10.10.1ip route 0.0.0.0 0.0.0.0 10.10.10.200 (ISP IP ADDRESS)when I configure this like that everything...

i need to order an NPE-G2Now I have a confusion.there is two product Nos.could someone please clarify.the product number areProduct Number Product Description NPE-G2 --- Cisco NPE-G2, including 1-GB default DRAM and 256-MB default flash memory NPE-...

Hi,I am trying to setup a 851W router. It now seems that the current IOS version (12.4(4)T7) does noet support multiple VLAN interfaces. Is there any version that does support this? I can't find any.Kind regards,Jan

Dual 6506 IOS switches in each of two buildings (A1,A2,B1,B2). Dual 3750 IOS switches in each of two other buildings (C1,C2, D1,D2). Each building pairs are will run HSRP to the LAN segments. Each pair is also tied to another building pair for MAN ...

We just deployed a new Internet router that is running a multi-homed BGP setup. Our company provides ICMP and SNMP performance monitoring, mostly via VPN connections. What we are seeing is a very high rate of transmit discards. I believe these are th...

I have an application running on a linux machine which needs users to be connected directly to the network where the application's interface is located. Unfortunately I have remote users willing to use this application. I do not know much about how t...

Hello, I have 3 conections to my ISP. All of them are frame relay (E1), my problem is: I configure as follow: interface Ethernet4/1 ip address 200.109.243.129 255.255.255.248 secondary ip address 200.44.154.185 255.255.255.248 no ip redirects load-in...

Hi,I have just installed an AIM-ATM card and a VWIC-1MFT-G703 card in a 3745.After restarting the router, it would appear that the WIC card is not being recognised.There is also no "controller" command available from global config.Output of show ver...

Hello dear Cisco NetPro Forum members,I am actually working on the issue of the direction of a flow regarding an Autonomous System Border Router. My question is related to the NetFlow protocol. There exist an optionnal field in the template that goes...

what is difference between chanalize and fractional T1?what is the configuration difference between chanalized and fractional T1?

I want to restrict it to only answer calls on certain numbers AS 5300 cisco router. The calls are Dialup not ISDN. Please help me on this

Dear All;i need to configure port 3389 (RDP) Port. i have three Layer 3 devices. Cisco 2800 connected to I.net the Pix 5xx then again Cisco 2800. NAT is already configure in PIX525. Port forwarding command is#)IP NAT inside source static tcp 192.168....

I need to be able to trust DSCP on the follow 10/100 module WS-X6348-RJ-45 running Native IOS. Currently I can't trust any thing and have to use the MQC type config to classify and mark packets...Problem is I don't know all the traffic that needs t...

Hi, What happens when both the end(pc and switch) is configured as autonegotiation ?