Routing

I haven't gotten the whole process figured out, but it seems like I am out of luck...I currently have some 2621xm routers with this IOS image:c2600-ik9s-mz.122-23a.binIt is the feature set for IP Plus IPSEC 3DES. I use this for connecting to the rou...

I am trying to interconnect five sites that are on an existing fiber ring. Four of the sites, as a minimum, requires two (2) fiber WAN interfaces (call one East the other WEST. There is a final router that will require four (4) fiber WAN connection...

HI Expert's!is there any Recomended software for trouble Ticketing.if so plz list the usefull link10xs

Dear All, Is there any way to avoid giants on serial port of router ?regds,aman

Hi ,I have two Cisco routers 878 and 836 with "flash:c870-advipservicesk9-mz.124-6.T2.bin" and "flash:c836-k9o3s8y6-mz.123-8.T9.bin"My problem is If I configur Standby group 99 priority 110 or vrrp 1 priority 110 on Cisco 878 I lose the secondary R...

We have a regional network coming into our DMZ on our Pix 515. We have an IP any any rule and have not locked down what ports they need to use (AD, Exchange, File server, internet). Is there a port monitor we can use to list all the ports over some...

Hi,I need to know the cable configuration to make a cable(DB9) coming from the E1 Card on a martis node into a Channelised E1 controller card(RJ45) on a router.So basically DB9-to-RJ45. All I need are the cable configurations.Also is this cable DCE o...

Hi I have following ISDN Dialer Backup config (plz chk below) my serearl Links is down between my two router ABC and XYZ. kindly chk the config and tell is theresome thing worng becoz i could not Connect my tow differnt network on the ISDN plz chk ...

i have cisco 3650 switches, with port based vlan implemented. is there a way i can set user based vlan without using CISCO ACS.Swapnil JainIndore

Currently, we are running BGP with our ISP and we are receiving a default route from my ISP. How to I redistribute the default route that learns by BGP with med into EIGRP table?

Hello,I need the routing information for the two P2P-routers as shown in attached diag. The firewall is already configured with the route. SITE-B needs access to DNS, Active Directory, Fileshare and Internet from HO. What would be the routing in both...

I looked through the IOS chooser, and it is really not that helpful. If I want version 12.4 for my 2621xm router, I have about 80 choices, and narrowing by feature set isn't much help, because I can't find information on what the feature sets do.Any...

First of all thanks, this is very simple, what is best recommended when connecting several routers (internet, partners, extranets, etc) to a 6500? should each link 6500-to-router be a /30 for the single uplink or /24, or maybe 6500-to-router with 2 E...

Is the cisco 2516 compatible to a T1 CSU/DSU? If so, what is required to successfully