hello does cisco nexus 3000 family support Intervlan Routing ?we have Cisco Nexus 3164Q and C3064PQ-10GX.
Forum Posts
HelloJust completed the Enterprise Encor exam 350-401 and wanted to share my experience, As I guess anyone with an active professional/ccie R/S cert like myself will need to take this exam sometime soon to keep accredited. This exam replaced the old ...
We foresee some WS-C3650-24TS IPBASE what (DNA) license reference do we need?
Resolved! Out Of Sequence frame
Hi Guys, What is Out of Sequence frame and where can we look this in our cisco router?
Hi All, Current we have 2 site point to point connection.Site A and Site B is form BGP neighbour, and LAN with HSRP configuration. Site A pri - A01 pri.txtSite A Sec - A02 sec.txtSite B pri - B01 pri.txtSite B sec - B02 sec.txt The issue is when we s...
Resolved! OSPF design
can anyone please recommend any book that will explain ospf design very well , most of the book just talk about difference between LSAs and Areas but I need book talk about different whether have one area or many areas which one is best and why ,man...
Hi All, I have an ios xe (asr 920/9XX) router that I have noticed that the OSPF neighbor will not re-establish an adjacency if it drops unless the 'mpls ip' command on the OSPF interface of the flapped link is toggled off and back on. Here is an ex...
Howdy, I've got a problem in my simulation, for some reason I can't seem to get the DHCP packet to make it over to the DHCP server. It makes it to the sever access switch, then drops. I have the DHCP server set up with a static IP in my Servers VLAN,...
Resolved! C1111-8PLTE / LTE Troubles
I'll keep this brief as possible; I'm having trouble bring up my LTE / Cell0/2/0 connection on my C1111-8PLTE. I can get the connection up with nearly no action by me on a fresh start (no startup-config). After adding a static route, I can pass traff...
Hi All, I was wondering what is the best practices followed for Enterprise WAN connections in the following scenario1) Own APNIC Public IP pool2) TWO ISPs for Redundancy (Multi-homed)3) ISR routers being used for BGP with both the ISPs (Edge route...
Resolved! 3-tier Topology with OSPF
Does anyone see any issue with this design using a 3-tier topology within OSPF single area 0? The core switch connects to the distribution layer via L3 port-channel over point to point OSPF.
HI Sorry i can speak English very well so let screenshot tell the storyRouter 1Router>Router>enRouter#show runBuilding configuration... Current configuration : 1259 bytes!version 15.1no service timestamps log datetime msecno service timestamps debug ...
Hello I am trying to boot into rommon mode in order to turboboot our ASR9k however the device seems to be stuck in a loop which keeps presenting a boot menu.. Anyone any ideas how to break out of this? Resetting card .......▒ ▒ѐ0▒Booting Main Pro...
Background:RFC 3101, 1587, 1583, RFC 5340 and RFC 2328 can be changed using the compatible command.To restore the method used to calculate summary route costs per RFC 1583, use the compatible rfc1583 command in router configuration mode. To disable R...
CISCO 1921 CAN BE USED WITH No.2 HWIC-4ESW? or just one expansion slot can have ethernet connection? I require both expansion slots to be 4 ethernet 10/100 ports but i'm not sure if with 1921 is possibe.Thank you
