Cisco Nexus 1000V cloud switch is a virtual appliance. It provides integration of physical and virtualized network infrastructure. Cisco Nexus 1000V switch is compatible with VMware ESX and vSphere (ESXi) hypervisors. There is a version for Microsoft...
Hi Experts, New in SDWAN, and trying to figure out whether the below will be achievable with our environment :- Branches (2 sites) will have only 1 WAN-Internet cloud for connectivity to both DC/Hub and Internet - Hub and Spoke topology (all branches...
Hi, I'm seeing an issue on boarding a CSR 1000v SDWAN image. I have applied the bootstrap configuration to the CSR and have successfully authenticated to vBond and vManage. What I am not seeing however is the control connections to vSmarts. cedge-si...
Would like to know about the future of Cisco SD-WAN with future of 5G What will be the use case to use SD-WAN in future when 5G will be available ?Currently we have invested in SD-WAN. In future when 5G is available what will be the use case to use S...
I have the below Cisco ISR router in my environment. Cisco ISR4451-X/K9 running Cisco IOS XE Software, Version 16.06.06 Would like to know if this router can be used as SD-WAN router by changing the IOS router to SD-WAN IOS ?Does this router model ca...
I have a customer situation where they want us to create 2 separate SDWAN domains (Domain 1 and Domain 2) for their 2 regions and then, exchange routes between them so that each domain sites can communicate with each other. Obviously, there are 2...
There are actually many solutions for Cisco SD-WAN out there. Cisco DNA Center, Viptela, WAE, Crosswork Controller and XTC. Can you define the difference between these solutions. I know that DNA Center is used for SD-Access, but Cisco offers this to ...
Hello All, Be noted after reading this document which is provided by CISCO with the subject [Cisco SD-WAN: WAN EdgeOnboarding] https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjs3fjxhPHsAhW-UhUIHWNkBVcQFjAAegQ...
Hi,I found only 1000:10000 community, which is one of example as below snapshot, can be filtered with BGP routing policy about the routing redistribution between BGP and OMP in service side.It's likely unable to filter prefixes with any other communi...
Hi everybody,I am trying to learn viptela based SD WAN.Please consider the following example: Above:1) We have some locations connected via PTP link, All routers are Vedge routers and running OPM with vsmart ( not shown)2) We have certain application...
Here is my design question. Say I have 100 sites. I am doing "on prem" deployment of vManage at Headquarters. I can install my Edge devices to 99 remote sites and they have a Control Plane connection to HeadQuarters and be managed by Headquarters....
Hi everybody,Open Day Light Controller discovers Underlay Network's topology using BGP-LS. For Viptela based SD WAN , vSmart and edge routers run OPM to exchanges routes ( Service routes, TLOC etc). Is it correct to say VSmart does know Underlay ne...
Using the Feature Template of "VPN Interface Ethernet " is there some way to create one template that will allow me to choose DHCP or static for Ge0/4 (transport interface); and if static is chosen then fill in the necessary IP info? Super annoying t...
Hi,I am going to deploy aggregation router at SD-WAN DR site. i am using vmanage cluster in primary and DR as well. primary site is up and running. i am using hub and spoke topology in our sd-wan network and using the same site id 201 for both aggreg...
Hi there,I bought an ENCS 5406 off the Internet. It currently has configs and is password protected. How do I wipe it clean so that I can start playing around with it. A link to some article or videos would be great. Thanks in advance.Regards Tuso
