I recently spun up a Cloud vEdge in AWS using an 18.3.0 AMI which was the only one I could see in the marketplace. Now that I have it joined to the SD-WAN I was hoping to update it to match the OS version running on the rest of the overlay. The upgra...
Forum Posts
I am trying to ping Loopback interface IP from PE Router in Underlay SDWAN vpn 0. But its not Pinging from either side.we are using Static Routing between PE and vEdge.is there anything special we need to do?
Hello! We have a couple 4451 routers that someone upgrade to the SD-WAN XE software for a point of concept that we are doing soon. The problem is the software that person put on them is too new. We now need to downgrade the software to an older versi...
for SD WAN licensing, what is the relationship of license Bandwidth, and the actual device throughput? is the Licensing bandwidth excluding the DIA service bandwidth? or do we need to calculate the DIA bandwidth also to the total licenses bandwidth r...
Hi Cisco Community,Strange one here. We have deployed 2 x ASR1001-X as cEdge device to onboard a site of around 2000 users onto our SDWAN network. 1 ASR onboards into vManage with no issue and we can see it in the device_ bring_up. The other ASR give...
Hi All,I'm having some issues with my SD-WAN Lab and I hope you can help me :-).Right now I have two vEdges routers vEdgeBR1(RID 4.4.4.4) and vEdgeDC1(RID 5.5.5.5) with two connections each (internet and MPLS). The internet connection works fine, I r...
I'm trying to switch a CRS 1000v router from autonomous mode to controller mode. I've read https://www.cisco.com/c/en/us/td/docs/routers/csr1000/software/configuration/b_CSR1000v_Configuration_Guide/day0-bootstrap-configuration.html. I copied cisco...
I created two sub-interfaces on vEdge router - ge0/1.10 and g0/1.11. They are in the same VPN.ge0/1.10 has IP address 10.1.10.1 (VLAN 10)ge0/1.11 has IP address 10.1.11.1 (VLAN 11) I have ge0/1 connect to a Cisco layer 2 switch as a trunk port. It'...
Can somebody explain how does a vEdge VM(virtual machine) reference the cloudinit configuration file? I was reading this document: https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/sdwan-xe-gs-book/cisco-sd-wan-overlay-network-bringup...
Resolved! Any way to SSH to a Meraki switch or AP?
I'm having trouble SSH'ing to the outside interface of one of our branch offices. NAT however is working and the Meraki switch and AP are up and connected to the cloud. People at the site can get to the Internet. I was thinking if I could somehow ge...
Resolved! SD WAN Lab vEdge control down
Hi,I created SD-WAN lab on vMware and everything are working but there is no vEdge to vsmart connectivity.When I run the command "Show control connection" on vEdge I can see DTLS connection to vBond and vManager but not see to VSmart."Show control c...
Release Notes https://www.cisco.com/c/en/us/td/docs/routers/sdwan/release/notes/20-1/sd-wan-rel-notes-20-1.html https://www.cisco.com/c/en/us/td/docs/routers/sdwan/release/notes/xe-17-2/ios-xe-sd-wan-re-notes-17-2.html
I am setting up SD-WAN routers in a lab to prepare for a migration project. I have 2 sites A and B. At both sites A and B I have an SD-WAN router connected to a layer 3 core switch running EIGRP. The core switch is the default gateway for all VLANs a...
Hello experts, We are thinking of deploying an SD-WAN network and we'd like to know how the DIA works. As far as I've been able to see, it uses destination IP addresses: "It is also possible to configure a vEdge router to forward data traffic directl...
Hi Guys,I was looking for a way to integrate the Status of the Certs viewed in Config > Certificates > Controllers on vMange.Unfortunately I couldn't find any API Calls that would show me what I'd like to see.Has anyone already managed to integrate t...
