Would you say the TLOC is present in the underlay or overlay?I think it is both, as the "next hop" for prefixes in an overlay VPN will resolve to a TLOC, and the TLOC contains the public and private address required to route the packet, in the underl...
Forum Posts
How can I make default route via interface with loopback in bind mode?interface Loopback1 tunnel-interface encapsulation ipsec color red bind GigabitEthernet1 no allow-service bgp allow-service dhcp allow-service dns allow-serv...
Resolved! SD WAN Route leaking on WAN edge routers
Currently both cEdge and vEdge are to be able to access to internet, where both vEdge and cEdge is able to ping to 8.8.8.8 sourcing from 172.16.10.10 and 172.16.10.30 respectively. But hosts facing vEdge VPN 10 and cEdge vrf 1 are not able to ro...
Hi, I'm having problems with trying to update the template to a cEdge. I need to add a couple of commands to the configuration.When apply the template from vManage with the changes it goes to Schedule as if the router were offiline but when I connect...
I have an eve-ng sdwan setup. I have applied a device template to the vManage but forgot to add management interface... oops!I have the cli admin access to the device. Is there a way to remove/disable the template from vManage via cli? I have tried f...
dCloud SD-WAN 20.9 Custom Topologies import/upload topology. I created topology with SD-WAN 20.9 Custom Topologies with version 20.9.1 and exported to tar.gz fileWhen I import/upload the topology, I can modify any device and/or add new link.It looks ...
Is there form for offering new features on the vmanage? as example field for searching ip addresses which are included in the prefix lists it will be very convenient or field for searching in the list (prefix list / object groups / vpns and etc)I mea...
For the SD-WAN Bulk API, when one calls state and statistics endpoints, how delayed are the results, i.e. how often are the backend data updated?Thankshttps://developer.cisco.com/docs/sdwan/#!bulk-api
Hi Experts, I am configuring SD-WAN Lab with EVE-NG on Google Cloud.vManage configuration was completed.So, I tried to log in to vManage GUI from my laptop with Google chrome browser, but i cound not access.Ping is unreachable from my laptop to vMan...
I am trying to apply an ingress policer policy on one of my vEdge interface, when try pushing the configurations from vManage, I get the followingcom.tailf.maapi.MaapiException: illegal reference /ncs:devices/device{vedge-11OG641180001}/config/vpn/vp...
Hi Community,I have an AAR policy with multiple Sequence types in this exact sequence (Voice, Video, Business Apps, Default).When i enable cloud on ramp for saas for O365, the GUI adds a sequence rule for the O365 apps at the end in the Business Apps...
DHCP feature template option ascii string devicespecific var gets mangeld In device specific values we input for eg. for HP devicemanger option 203 in dhcp : P1="Overijssel";P2="Zwolle" But when template is pushed and you do show sdwan running-cifi...
Hello, Upgraded vManage / vSmart / vBond etc to 20.9.3.1 and started rolling upgrades of ISR4331s from 17.3.2 to 17.6.5. SNMP polling (v3) was working without issue pre-upgrade but post upgrade i am unable to monitor or poll the devices, i get the fo...
Dear Experts,I'm looking to connect my two window PCs with an optical networking card (PCIe card) using fibre optics cable and I wish to achieve a 100gbps data rate. The wavelength I'm looking at is single lambda (~1550nm) possibility QSFP28. Can any...
What is the purpose of enabling tunnel/ allowing services in the vpn 512 interface
