Hi, I am having a weird problem I can not explain, and need your input to solve this mystery. I have a viptela vedge connected to a Juniper EX switch/router that is the gateway to Internet, this vEdge router has many inbound/outbound IPsec connection...
Forum Posts
Hi all, please had anybody succesfully onboarded to on-premise sdwan controllers v 20.3.2 (or lower) an ASR1002hx router with enterprise CA?i have tried manual onboarding, also multiple times bootstrap onboarding with root ca included in bootstrap, r...
Dear community,I am new to programming/APIs and I'm working on some SD-WAN automation but I'm having hard time searching in SD-WAN API Docs (https://vmanageIP/apidocs) for the correct API I need for several use cases.For example I want to pull the ro...
Hi, I'm hitting a new bug:Cisco PKI Root Certificates not Installed on 16.x RoutersCSCvr71672 Symptom:CRTVERFL error during plug-and-play (PnP) process with cEdge Router.'Show sdwan cert root-ca-cert' on the router does not show a Cisco CA.Condition...
Hello, I do have a relatively simple SDWAN fabric that includes a public-internet line and a private line for all sites in the transport VPN0. The controllers are cloud hosted from Cisco within Azure DC and the private line does not have a connectio...
Resolved! Tunnelled Interface prevents ping
Simple drawing attached. I have 2 regular routers and a IOS XE router. With "regular routing" I can ping 100,000 pings from 2.2.2.2 to 1.1.1.2. (without Tunneled Interface applied)I have read that all interfaces on an IOS XE router are in VPN 0. ...
Dear Community , I have one doubt with SDWAN - Setup on premises as i read some docs that we need Public IP For Vbond ( it can be NAT when we use on premises ) , but me Question is after Vedge is authenticated by Vbond and DTLS is completed then Next...
Hi Expert, I am novice in SD-WAN Viptela, recently i am trying to make some use cases like policy implementation, making device templates, App Aware policy, DPI, hub spoke topology etc, means all the possible use cases. Could you please guide me and...
Hi, what if during a migration you need to rollback the SDWAN config to the previous non-sdwan config. (Note that I'm not talking about the IOS software, just the config). Just detaching the device won't help as the SDWAN-config will stay in place (a...
Hi everybody,I am just start learning about Viptel SD WAN , can we use VPN0 for in-band management for vedges?Thanks
Resolved! Remove
Remove
Hi everybody,Cisco provides VAnalytics as a hosted solution where Cisco provides all controllers on its cloud and customer devices such as vedges can talk to them over internet.Is there any plan from Cisco to provide VAnalytics as on-prem solution? ...
Hi, Using the API provided in answer to my previous question. https://{{vmanage}}:{{port}}/dataservice/data/device/state/CEdgeInterface?count=5000We've noticed that the figures for interface speed reported by the CEdge devices is incorrect. vEdges a...
i have a question about creating new tenant while
What are the technical differences between the TLS Proxy actions "No Decrypt" and "Pass Through" in Cisco SDWAN? Attached the screenshot below. There has been very little to no explanation in the docs and hope to get better elaboration here.
Recognize Your Peers
