Does anyone know the process to remove a vManage node from cluster and switch back to standalone? I have only two nodes in a cluster in my lab and I want break the cluster and switch them back to standalone nodes to test active/standby setup. When I ...
Forum Posts
Hi all,I'm working with Viptela Templates for an ISR-1100 and I want to create two external interfaces - one with DHCP (a default and fallback interface) g0/0 and one with a STATIC IP g0/3. I want to preconfigure a STATIC port while I'm on DHCP.Howe...
Hello guys, Someone could you tell me, how a prefix can go in "inactive" state and why ? I dont find any information regarding this status. Many thanks, BR.
Hi guys, I hope you're well. Hoping someone can help me or at least point me in the right direction to some useful articles that I can read to understand. Doing some studying on Cisco SD-WAN ZTP and from my understanding once the router is netw...
Hello All, Thanks all for responding to my questions. Really appreciate it. I have this strange question, where I could not find any documentation on this. On vManage, when you do troubleshooting under simulate flows, the output shows the possible pa...
Having some issues with pushing a template to an 8500L SDWAN cEdge.. getting the following error. SDWAN control shows connections established and such.Versions:vManage/vSmart/vBond - 20.4.28500L - 17.04.01a.0.211 Looks like the template gets there bu...
Resolved! vManage cannot be accessed
Hi vMagane cannot be addessed via GUI like below screenshot. After waiting for a while, it can be accessed. but sometimes it cannot be accessed even after waiting for long time. Any other reason can cause the isssue? Thank you
Hi Please see the below picture. Three vEdge are registered at vManage and are verified via certificate. but its status are still in "Partial" . Where the issue is? Thank you
Hello,What configuration changes I need to do on vBond if I am deploying a cEdge behind NAT?I can ping from cEdge to vBond but seems like the certificate is not installed on the vSmart.How can I solve this? Thank you in advance.
Hi, anybody had any success with recovering database on vManage ? I have a on-prem standalone vManage (not a cluster). I did db backup on active vmanage and transfered it to backup vManage, wanted to try a recovery scenario. When I try to do a r...
High Level Goal: vManage integration with SPLUNK Goal Description: Customer needs to gather data from Cisco SD-WAN vManage into SPLUNK platform. There are many reasons why vAnalytics is not suitable and final solution. E.g. W...
Hi guys, i'd be very happy to receive any feedbacks from the expert ones about this scenario:- my customer wants to implement on premise the controllers deployment - it wants to use disaster-recovery for resiliency of solution (their are going to pro...
Please I am taking a training with Packet Tracer. Along the line, I needed to add a MetroE in a WAN, but I couldn't see maybe 'a device' I can use in packet tracer to represent the metroE to be able to configure the metroE on the router interfaces. A...
Resolved! SD-WAN Static Route Filtering
Hello there,I'd like to filter a specific static route (service side). This route should be announced only for a site and not to all others.How could I do that?I am using cEdges in vManage mode.Regards.
Hi Team, may i know what the default directory in Viptela vedge where it saves image, so that i could upgrade the another box using scp protocol ?
