Buy or Renew
Buy or Renew

Service Providers

Explore information and join discussions with peers and Cisco about Next-Generation Internet, MPLS, voice over IP and Visual Networking Index.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Browse the Community

Activity in Service Providers

Start a conversation

NCS 520 service instance trunk configuration

Hello,Looking for some help on this trunk config I maybe don't understand the service instance configuration on a Ncs 520 but I'm unable to see the other N520 connected to this device with these configs plugged into each other. Please let me know wha...

Adcom911 by • Level 1
  • 61 Views
  • 1 replies
  • 1 Helpful votes

Cisco CUBE Reason: Q.850;cause=65

Hello! We have a client who uses cisco cube and cucm, the client is currently having issues calling out to certain numbers, the calling party hears a ring or two and then the call disconnects.  The message flows show a very quick bye coming from the ...

jgraham01 by • Level 1
  • 28283 Views
  • 13 replies
  • 0 Helpful votes

BGP EVPN VPWS - Cisco & Juniper - Traffic withdrawn

Hi dear community,I am facing an issue with the following setup :Ping is not OK for the BGP EVPN VPWS Service (Vlan / EVC 20).Here is the configuration of the involed PE :Cisco PE ISR1111:interface GigabitEthernet0/0/1 no ip address negotiation aut...

Jerems_0-1727073861383.png Jerems_3-1727075192060.png
Jerems by • Spotlight
  • 324 Views
  • 13 replies
  • 1 Helpful votes

Resolved! install the package for Cisco 9901 IOS XR 7.9.21

I have Cisco 9901 with IOS XR Configuration 7.9.21 some protocols can't appear with me like isis ,MPLS ,OSPF and multicast as per below, i think I need to install the package #show install inactiveThu Sep 19 15:58:25.193 GMT+312 inactive package(s) f...

EVPN VPWS problem

HiI was wondering if anyone can help me out with a problem regarding vpws.I have set up a lab and followed the asr920 guide to configure evpn-vpws ios 16.5.1 but can't seem to get it to work.The VC comes up but I see no next hop or anything.From what...

Adrian.X by • Level 1
  • 1601 Views
  • 4 replies
  • 0 Helpful votes

Resolved! copying image to NCS5500 failing

Dear Experts, I'm failing to copy an upgrade image  file to the NCS5500 router  Im getting security notifications like this one below xr-vm_node0_RP0_CPU0:/misc]$RP/0/RP0/CPU0:Sep 17 17:36:02.763 AEST: sftp_server[68061]: %SECURITY-SSHD-3-ERR_FILE_PA...

dgawaya1 by • Level 1
  • 179 Views
  • 4 replies
  • 0 Helpful votes

SRv6-TE EVPN-VPWS

Hi experts, In an SRv6 network with uSID, I have configured an EVPN-VPWS. Now, I want to enforce this to follow a strict path via SRv6-TE. I’ve assigned a color to the EVPN route through an extended community and created a policy, but it keeps follow...

Resolved! mpls_ldp[1240]: %ROUTING-LDP-4-PEER_DUP_ADDRS : VRF 'default' (0x6000

Getting this error message in the log: mpls_ldp[1240]: %ROUTING-LDP-4-PEER_DUP_ADDRS : VRF 'default' (0x60000000), 1 Duplicate address(es) advertised by more than one peer I'm not seeing more than 1 LDP peer advertising this IP however. RP/0/RSP0/CPU...

NCS 5500 will not upgrade

We are continuously encountering this error while attempting to upgrade a NCS5500 from 7.0.2 to 7.3.2. The error presents as follows:May 03 16:16:52 Install operation 95 by root: install add source /harddisk:/ NCS5500-iosxr-k9-7.3.2.tar May 03 16:...

Dual MPLS with two different ISP sharing a single public IP

Hi, I would like to simulate a the following scenario whereby I have two MPLS (Dual ISP) and have customers connecting to the primary link ISP 1, when one customer let's call it CUSTOMER A ISP1 link is down and I am still active on my primary ISP 1, ...

Load more
View All