Routers - Small Business

I was never able to get QuickVPN to work with my RV042 on our new computers, which use Windows 7 (64-bit).  I found some positive comments about Shrew Soft VPN Client, but I can't get it to work either.  All computers are using Windows 7 Professional...

Hi,Is it possible to setup differnet VLAN in different networklike VLAN1 192.168.1.0, VLAN2 192.168.2.0 and then port 1=VLAN1, port 2=VLAN2or how to config VLAN on rv042gThis function seems appear on rv220w...Thanks

We purchased an RV220W to allow remote clients to connect into the main office and work just as if they were connected in the LAN at the office. Most of the work is done through a remote desktop connection to a terminal server in the LAN at the main ...

Is there a way to assign a static IP to a quickVPN client? Would I do this by entering in the MAC of the quickVPN client into the DCHP mapping table on the RV220W router? Or would I need to use a VPN policy to assign an IP address to an incoming quic...

I have a C2900 router configured with dual wan:interface GigabitEthernet0/0interface GigabitEthernet0/1The first connection is through optical fiber and the second one as a coax cable modem. The first interface serves as the primary connection and th...

Hi all,As stated in the subject my Wan status appears as Connected (Inactive). Other than that everything seems to be working fine.Any ideeas?I am using the latest firmware v1.1.1.06 (2013-12-06, 11:02:37) and the router is establishing a PPPoE conne...

Hi,We've had this router for a year now and have had these problems from the start. I see from googling that we are not alone in experiencing these problems..WAN connection drops on all clients frequently and error log looks like this:Mon Jan 13 15:5...

Does the RV215W Wireless-N router support certifcates for site to site VPNs?It seems that you have to use a Pre-Shared key.Is this true as the remote endpoint will only accept certifcates.

I have been using the RV320 for 1 week without any major issues until I attempted to install our RapidSSL Wildcard Certificate. When attempting to install it (Certificate Management/My Certificate), 3rd-Party Authorized I receive this message:Certifi...

The latest tomtom go live 1005 car navigatioin device map updates on http://download.tomtom.com/nav3/865/nav3/Europe.ttpkg fails after 80% (over 2 GB of data downloaded) with a timeout.After disabling the IPS for http the download works.Just in case ...

Hello,I have to add a new firewall rule & service to open port 995 and 465 for the SSL access of the German eMail provider T-online. So I have to add a new services for this ports. But if I say ADD I get the "wrong" error-message that the ports are s...

Hi I'm new to the forum and tearing my hair out here. We have an RV110W with a mix of computers and VOIP handsets. Strange thing is that after 16 minutes of a VOIP call, the port seems to get swapped and the call hangs. The VOIP provider, who is pret...

Hello, I have a cisco routeur RV220W with the firmware 1.0.5.8. I have updated it the last week.I have problems with the wireless. Apparently, i am not the only one. The wifi  connection is slow, with this parameters :2.4GHzG,N  Mixed;  Auto bandwidt...

Ugh. I've spent endless hours trying to get the VPN to work. I've done all the recommended actions for QuickVPN (run as Vista SP2, disable avast, enable windows firewall, disable windows defender, create windows ICMPv4 rules, turned on IPSEC services...