Update - We have completed the relabeling project for the wireless board. We will be lifting read-only mode today the Sixth of May. Thank you all for your patience and feedback. We are approaching our latest step in relabelling posts across the Sma...
Forum Posts
Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant- Discover support content and options for your gearSupport page index - Contains a ...
My Cisco 240AC system was setup by someone else. How do I log in to manage my mesh system?
Hi,i have a few problems with a CBW240AC in standalone mode, SW 10.9.1.0:- How can i change the password complexity rules?- How can i set "public" as a SNMP community and limti access via an ACL?- How can i access the console? I found a command "cli-...
Hi everyone,We are going to try to use a Cisco Business wireless access point(150AX) with the Cisco Identity Service Engine. Has anyone tried this and is able to share some insights and advice?
Hello everyone,About 3 years ago we bought 2 WAP125 devices for around 100€/each. The configuration was generally left at default. The devices are powered by a PoE switch.I noticed that sometimes wifi clients (laptops and smartphones) lose the Intern...
Hi there,My 2 APs CBW150AX-E-UK are stuck at 15 dBm for 2.4GHz transmit power even if setting is set at 100%.5GHz works fine at 20 dBm.FW is the latest. Tried changing almost all possible settings with no luck.Any ideas will be greatly appreciated.
I get disconnected and reconnected to my AP's a lot kicking me off the 5GHz network and pushed to the 2.4GHz network. The SSID is the same but split frequency. There is only about 1% interference on the 5GHz network and the 2.4 averages about 20%. I ...
Hi everyone,I have recent got my replacement of the faulty 150ax at my own cost and I’m experiencing difficulties setting it up. I plugged the new AP into the same port as the old AP and made sure the port configuration is in trunk mode, have access ...
As attached in the above screenshot none of the client devices show neighboring AP in Network Summary. Is this expected behavior?FYI, the client can see all the APs but the Cisco 150AX AP is not reporting the same. Is there something I am missing?
Dear all I have a new cbw150ax-s unk access point. I have set a captive portal and test AAA authen with external radius. All work fine but there is no accounting send to my radius server. So I need to access ssh to use terminal and enable radius acco...
Hello everyone,I'm fairly new to the Cisco universe and hope you can help me with a problem I can't quite understand.A customer of mine has the following setup: Cisco C1111-4P router and a CBS 350 series Switch. He now wanted to connect two AX150 acc...
I am using 3 AX150 AP in the home environment (700sq.ft with 10-15 clients) and even with the default setting client keeps disconnecting and fails to do seamless roaming with FT enabled with wpa2. With wpa3 roaming doesn't even work. Earlier I was u...
Resolved! Cisco 150AX stuck at blink green loop
the ap suddenly stopped working and blinking green for a while, and return back to white and blink green again. Seems to be stuck in a boot loop. I think it could be caused by a damaged image when the AP could have been powered off due to a power tri...
Resolved! Cisco 150AX rebooting by itself
Dear all,Before one of my APs fails, it keeps rebooting unexpected at a specific time. at 01:20 UTC+8, I noticed my remaining AP also does that. its seems very weird to me as I clearly did not set any automation to my APs to perform self reboot. Luck...
Hello everyone,Recently I bought the AP cbw150ax (my first experience with Cisco), but whatever I do I did not manage to connect my MacBook Pro (M1 Pro, latest MacOs Ventura 13.0.1) to its WiFi.So, right after the unboxing (default preinstalled firmw...
Resolved! Cisco 150AX ap not recognising itself
so I was changing the region configuration on my ap. after the last edit, the ap no longer shows up on its own management page. the led is blinking Green Red off. This really seems weird to me. Any one knows what's going on with my ap?Thanks for any ...
