Hello,We have one fabric composed by only 1 MDS 9148 switches, and now, we want to add a new 9148 S MDS switch to this fabric.one VSAN (100) and one zone set activated on this switch.Now, we need to add a new switch in fabric. This new switch is also...
Forum Posts
Can someone provide a guidelines in calculating latency in NCS2006...What are the things to consider on this? Sample setup: Point - to - Point setupequipment with 10x10LC and 10GE client port. thanks
Hi,Trying to connect to a MDS switch using the ansible.netcommon.httpapi module in order to just run a gather fact via the nxos module.Here's how this basic playbook looks like:---- hosts: switch1gather_facts: noconnection: ansible.netcommon.httpapic...
Dear All,Currently we are using Cisco HX M5-240c cluster and we are going to buy a UCS S3260 Storage server if I buy this Storage server can i use this server for (NFS) or DAS activities an example I want to create a 100GB Vdisk on the S3260 Storage ...
Resolved! etherchannel between 2960s & QNAP
hi guys.i have a Qnap device that i created a trunk port with two interfaces and 802.3ad protocol and MAC state. and i connected those two to the switch .i created an etherchannel in the switch with LACP protocol and active Mode. the trunk port in th...
Several years ago I setup a free install of Cisco Device Manager & Fabric Manager to manage various MDS9148 switches. To the best of my knowledge, the last "free" version (i.e. no license required) was v5.2.2(c). I see that Cisco has moved beyond the...
Resolved! Issues with 56128P FC Interfaces
Has anyone had issues with Cisco Nexus 56128P Chassis trying to convert interface type to FC Please see below PIH-DC-5K-SAN-B(config)# slot 1PIH-DC-5K-SAN-B(config-slot)# port 33-48 type fc ERROR: Module type doesn't support this CLI ------------...
Hi, We need to connect Brocade and Cisco SANs for our production environment. Are there any docs or guides how to do that, what settings to use to achieve such thing, what are the shortcommings of such thing, are there any needs for specific licensin...
Resolved! MDS Switch BIOS
Hi All,I was upgrading this MDS switch (DS-C9148S-K9) from 8.4(1a) to 8.4(2d). After checking the impact of the firmware upgrade, by issuing the command in the following."show install all impact kickstart m9100-s3ek9-kickstart-mz.6.2.33.bin system m9...
Hi All, I have a customer who has Dell server storage and requires FCoE connection to switch, i have CISCO Nexus 5548UP switch and needed some help in understanding the physical connection and licensing and would highly appreciate if someone can help...
Hello, at work they recently connected an Isilon server to a Nexus 3172. I am connected with a QSFP broken into 3 interfaces to 3 nodes on the Isilon. I can log into the Isilon and see all interfaces are up with an MTU configured of 9000 but I can no...
Hello I am looking for the latest BIOS update for the R200-1120402W... can you point me in the right direction?
I've got a fabric containing multiple switches (9700 & 9300's). Currently the 9300 is the principal for a particular VSAN but I'd like for it to be the 9700. I've changed the fcdomain priority on the 9700 which shows in the configured domain but not ...
- FYI : https://www.cisco.com/c/en/us/support/docs/field-notices/722/fn72237.html https://www.cisco.com/c/en/us/support/docs/field-notices/722/fn72223.html M.
