Switches - Small Business

Hi guys,I am totally new and was given this task to complete. I  really really need help.We are using one network 192.168.1.0Shared  with data and voip.CISCO C870, 5 switches LINKSYS SRW248G4P .The  email wrote:-On the Linksys switch;- create two  di...

Hello,I want have a default switch.cfg and I want just modify  the IP address before import.It is possible to edit the  switch.cfg?I try with a text editor, but file may have binary  parts.Thank's

Recently we've changed our network routing, and now we're seeing some strange behavior.  Inbound VPN connections can't connect to resources, and it looks like it's because return traffic is being routed incorrectly.Example:* Switch has some static IP...

May I get help for the CE-520 in this forum?I'm trying to setup a CE-520 such that (for example) ports 1-4 use VLAN100 for the Voice VLAN, and ports 5-8 user VLAN200 for the Voice VLAN.Given that the CCA GUI gives you a drop-down box for the Voice VL...

Hi,We have recently had a SRW248G4 switch and I have been carrying out some tests for a new computer suite.  I have found via carrying out bandwidth tests that the fibre is only giving me 30 MB/s.  Other switches on my network (netgear, 3com) give ar...

Stop me if I'm wrong.My object is simple: make a small-business network with 1Gbit to the server, and 10/100 to the desktop.  Let's assume a ratio of 8 Fast to 1 Gig.  Oh, and chuck the server on a server VLAN, and the desktops on the data VLAN.  Why...

HiIs there a way to change a switchport status from "Discarding" to "Forwarding" on SRW248G4P?By the way, why all of a sudden a working switchport status is changed to "Discarding"?This port is connected to an Avaya IP-Phone and a PC (via IP-Phone).W...

We have a strange problem in our network.We have recently replaced all of our existing 3Com switches with the new Linksys SRW248G4P. Main reason behind this change was to have PoE based IP-Phones implemented over existing network cabling.We are using...

How can partners obtain an equipment demo of the following gear:·         Cisco Small Business Managed Switch - 48ports - Ethernet, Fast Ethernet, 10Base-T, 100Base-TX + 2x10/100/1000Base-T + 2xSFP - 1u - rack-mountable - stackable·         Cisco Sma...

I want to depoly 5 ESW 540-24 PoE switches in a network with depolyment of Polycom IP phones.As you know these switches come with QoS preconfigured for deployment of IP phones.Now I have general questions regarding advance QoS configuration done by C...

Using SFE2010 switches in both single mode and stacked mode. Want to config switch using saved tftp's config. I set up basics of switch including some nominal VLANs. Then save the running-config via tftp. Then I edit the rest of the ports for their d...

Hello,I recently began attempting to configure IGMP snooping and multicast on my work network and shortly realized that the SRW2048 switch series does not contain "fully functional" support for multicast.Skip down to see the question... but here's so...

Hi,I'm trying to monitor my SRW2024 switches through the Opmanager Network Monitor Solution but unfortunately this solution doesn't have predefined monitors for Linksys Switches. I need to monitor the CPU, Memory and Backplane Utilization.I contacted...