I'm taking Cisco CCNA classes at college and I purchased some routers and switches on ebay. I have three 2911 routers and I've been trying to configure some simple networks same as you would in packet tracer. The configurations I'm using work fine in...
Forum Posts
I have been looking and as of yet found an answer to my problem. I am hopeful that someone will see something that I don't and help me get my 2911 on line and working as expected. I am currently running a 1921 router and its working flawlessly. I ...
Helloi have configured IPsec tunnel between ASA and Branch router.can ping peer tunnel and ping is not working from branch host to asa internal host but asa internal host can ping host in branch.could anyone help with this??i have shared tunnel confi...
Resolved! Cisco packet tracer VLAN overlapping
Router#sh ip int briefInterface IP-Address OK? Method Status ProtocolGigabitEthernet0/0 192.168.1.6 YES manual up upGigabitEthernet0/1 192.168.1.14 YES manual up upVlan1 unassigned YES unset up downRouter(config-if)#ip add 192.168.1.13 255.255.255.24...
i HAVE FOLLOWING SCENARIO1. BRANCH 1 MPLS IP (192.168.20.1)INTERNET IP (192.168.30.1)2. BRANCH 2 MPLS IP (192.168.20.2)INTERNET IP (192.168.1.1)3. HUBMPLS IP (192.168.20.3)INTERNET IP (192.168.10.1)MY QUESTION IS ALL RELATED TO BRANCH 1. ALL SOLUTION...
Resolved! ISR 4321 throughput max
Question on ISR 4321, right now our device is setup for 100000 kb/s throughput, however when testing iperf on our private WAN connection (which is 100mb/s) we are only getting 42mbps. We are likely hitting a throughput limit on this device? Topology...
Resolved! Cisco acl
Dec 6 11:23:21.642: %FW-6-DROP_PKT: Dropping udp session 172.20.34.14:55599 8.8.8.8:53 on zone-pair inside-to-vpn class class-default due to DROP action found in policy-map with ip ident 0*Dec 6 11:24:06.219: %FW-6-LOG_SUMMARY: 1 packet were dropped ...
Resolved! Cisco Router & Cisco Switch
Hi there, I got a Cisco router on which the ISP line is terminated. I have connected Cisco switch to the router. At this moment I got one VLAN on the switch and DHCP is being done from the router. I would like to create two extra Vlans on the switch....
Hi,We have a requirement to create multiple interface vlans in router using a same ip range segregated to different subnets.First interface (vlan will be Status/Protocol UP/UP,10.23.174.0/27but second interface (vlan 9) assigned with the next subnet...
Having issues try to NAT over a BGP configurationBGP is up. Here is my configip nat inside source static 192.168.78.17 10.16.2.97ip nat inside source static 192.168.78.29 10.16.2.98ip nat inside source static 192.168.78.54 10.16.2.99ip nat inside sou...
Hello everyone!!! I can't understand what is chassis in cisco devices. All I know chassis is a hardware part of the network device. But what does it contain? Are network interface, fan, power supply part of chassis? All cisco dievices have chassis? C...
Hello every one,Im new with Packet Tracer and I cant send a ping from one PC to the server. Between the PCs its ok, but outside the router it does not work.Thanks
Mahdi,The previous problems were attached to multiple already closed/Solved threads and have been fixed. This is a new issue, therefore a new conversation should be started. Since you seem unable to start one yourself, I have done it for you. The new...
Dear allWhat is the transfer rate of the ISR1K?With an IPBase license and without encryption, is it possible to transfer more than 1 Gbps from LAN to WAN?The catalog only lists figures for encrypted and no information for unencrypted. I also found th...
