Hi Team, Please let us know the command to delete the single file in the boot flash. Switch Model : Cisco Nexus 3064 Below is the boot flash output in that we need to delete the highlighted one Host name# dir bootflash: 0 Apr 10 13:51:22 ...
Forum Posts
My company just recently built a new building and wired all of the offices with Ethernet cat6. We purchased a refurbished WS-C3750-48PS-S-N switch from NEWEGG. We installed it in a rack, plugged everything in...doesn't work .I know nothing about it o...
Resolved! Understanding VLANs
Hello, I'm fairly new to networking and am currently studying for my CCENT. I've been given the opportunity to assist cleaning up my employers network infrastructure. When looking at these two separate VLAN's there are ports being used on both VLAN 1...
To all,We have seen an interesting anomaly over the past three months where Storm Control triggers a shutdown of an interface as configured. The Storm Control configuration looks like the following;storm-control broadcast level pps 2k 300storm-contr...
Hello community, At this moment i am working on a school project to disign a network.To get my selve ready ffor the examBut i am a bit stuck right now.I made 3 seperated routers on a stick and those work just fineBut now i want to connect the 3 route...
Does anyone else feel like 9500's are perpetually at 100% fan speed? I have a 950024Y4C here that sounds like an airplane taking off. So I get that it's doing 100gig in 1RU, but no matter what the internal temperature of the switch is, it seems lik...
Cisco CAT 9200, does it support non-blocking and where can I find information? It's not mentioned in the data sheet.
i want to confirm if c9500 stackwise-virtual interface support mix 40G with 10G or 25G,Can someone share it?
Hello, I have a Cisco router 891-w and I'm trying to use it at home, but it does not login to the internet, this is my configuration.any help, please ? Router#sh running-configBuilding configuration... Current configuration : 2611 bytes!version 15.4...
Hi Guys I have core switch 4506-e with show ver Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASE-M), Versio n 12.2(40)SG, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2007 by Cis...
Resolved! Kron scheduler not working correctly
Hello Cisco Users I have a problem with scheduling a tftp backup job with kron.I confiured one of our C2960X with IOS 15.2(2)E3 switches like this: kron policy-list ConfigBackupcli copy running-config tftp://servername/switchbackup.cfgkron occurrence...
Hi.I am wondering if it is possible in IOS to assing a value to a variable (for instance $access_vlan) from within a macro?I do not want the set the value as a input value to the macro. More specific I want to assign the current access vlan number to...
Hello experts,I have 4x 7010 R5.2.1 (earmarked for upgrades to R6.2.x), each with a single Supervisor 1, 3 (plus default) VDCs (with one configured for OTV); with a pair in each OTV site. The CMP in one is faulty (but CP is fine) and RMA Supervisor r...
Resolved! Etherswitch module and BVI
Hi, Im having some trouble with switching and BVIs. Im trying to setup an AP with local switching so i need a trunk port. This is my network setup. When I plug the AP directly into the switch below the router all the vlans work however when I have it...
What are the new features of 4500E in compare to the classic 4500?and what that E stands for?and we have quite few other combinations as well4507R, 4506-E, 4507R-E, 4507R+EI know what that 4th digit is, but I don't know about those letters especially...
