Switching

Hi All, i am unable to change configuration register value on cisco 2960 switch. can any one please help me out with this.

I have 2 VLAN's configured on a switch. VLAN 100: Internal-Subnet VLAN 200: Guest-Subnet How to configure 801.1x on the switch port to put authenticated user on the Internal subnet? I am able to force unauthenticated user to be on the Guest Subnet

Had issues with upgrade 2x3850 in a stack . Disconnected the stacking cable and was able to upgrade IOS individually. Now when I connect them again with stack cables it not forming the stack.One switch will boot but other is just rebooting giving err...

Dears, I need to implement a scenario to one of my customers, he needs: Limit the Interfaces to a specific bandwidth ( 4 Mbps , 10 Mbps , 20 Mbps )all the interfaces will have the same gate-way IP( Router IP) customer has a Switch (3560-48PS) and a...

Good day Cisco community,   I was wondering if someone has come across the following QoS implementation requirement ?   Subject : Qos: Conditional Trust Model with a VLAN-Based QoS policy - approach and review   Hardware in use:  Cat4500 Sup8 and Ca...

Hello  I have two 3560-X switches, and I want to run macsec on them without a service module card, we basically need to test it first so we'll be running it on copper wires. Anyone knows if it's feasible to do that, or do we need the service module a...

Hello, I need to run BGP with BFD on my 3750X stack (two switches), which version of IOS I should use? BFD is in versions from 15.2.1E1(ED) to 15.2.4E1(ED), but which is stabile in your opinion? BR, Pawel

Hi, I have an ASR router with a 10 Gb interface. On this interface several sub-interfaces are configured. For now, I want to monitor traffic from one of these sub interfaces.  Monitoring per VLAN is possible with the commands, with the commands such ...

Hi. I want to control the bandwidth of the dynamic ip provided by DHCP.I want, static ip have more bandwidth.How could I accomplish this? Thanks This is my configuration file ! Last configuration change at 17:49:07 UTC Mon Jun 6 2016version 15.3    ...

In a Cisco 2801 providing internet access to 50 users, working as Firewall (Zone Firewall) and being part of a site-to-site VPN in having hugh load in the CPU. The CPU is configured as Router in a Stick with around 10 VLANS but as i said just 50 user...

I have netflow configured on a c4351 ios-xe isr on isr4300-universalk9.03.13.02.S.154-3.S2-ext.SPA.bin ios.  I am noticing that it is not sending out netflow v5 packets, across an ipsec tunnel, to it's collector.  It's configuration is below.  Previo...

Our pc's are not able to update their Symantec policy and it appears that the acl is blocking their access.  I created an access-list 150 to distinguish the traffic for the Symantec server, which is x.x.44.16. Ran a debug ip packet 150 detail.  I'm ...

I accidentally removed a trunk port (thankfully on a test switch) but noticed that it took approx 8 minutes for the port to become active. Even though the cable was unplugged for 2 seconds it felt like it took an age to come up.  Is this normal. This...