Switching

Hi all, As you all know, there are plenty of articles on cisco routers boot up process and memory types. But i find little on the switches; i believe they are the same.But there is one thing which puzzled me during the password recovery of the cisco ...

one of Our client has MPLS Network Connection in Saudi Arabia, the MPLS line is 1 MBps.we are providing them 52 IP Cameras (3 Megapixel), it uses 60 Terabyte of Storage for 24 Hrs 30 Days Recording, and the client needs all the recorded data should b...

A quick rundown on the problem. I had a user plug a switch into another switch configured with BPDU guard and the port shut down. They plugged their switch into another port also configured with BPDU guard and it let the switch connect. A little baff...

Hi, I try to load an image to a C3750X-12S with Smart Install. The Vstack director is a C3560E with 15.0(2)SE and a custom vstack group for the C3570X since it does not seem to be available in the built-in groups. The image is on a TFTP server. the c...

Hi there, I have a question regarding the below config:=================================class-map match-any cm-prec-1-outmatch ip precedence 1class-map match-any cm-prec-0-outmatch ip precedence 0class-map match-any cm-prec-3-outmatch ip precedence 3...

Ok. I have been racking my brain out on this with no luck. Could really use some help in fixing itSo here is my issue. I have 2 different VPNs and both are able to be connect to. I have split tunneling enabled and that works. But when I am connect to...

Hello Team,Please, what is the best way to renew my CCNA and CCNP Certification?Considering doing CCNA Security; but does this renew both certifications I already have?Kindly assist with this as I don't want any of both certifications I already have ...

Hello,what is topically  Firmware  for the Switch Ws c2960S-24TS-L? I have  the IOS 12.2(55) SE6. What ist different to the topically Firmware?thanks

DearsI get the below from the show environment output I want to proof that the below output temperature is normal for the asic can anybody route me to the proper document for proof.switch 1 module 5:  switch 1 module 5 power-output-fail: OK  switch 1...

Hi All, Good Day!I have problem regarding telnet the port through client going to server and server to client.I already set the port in our firewall but only 2 ports are can telnet the port 80 and port 443 but for port 12345 this the error occur "htt...

Can somebody help me understand what is trusted in the below config and find the documentation to back it up?There are 3 QOS statements here, "mls qos trust DSCP", "mls qos trust device cisco-phone" and "auto qos voip trust".-------Alone, mls qos tru...