Switching

Hi I am working on a packet capture/monitoring design - and have a question -Will traffic be forwarded from a Destination Monitor Port - If the capture appliance were to send traffic back.I am assuming this would be blocked/filtered But I am looking ...

Dear All,I am new user to Cisco configuration tool.How i can find out the compatability and the part code for any SFP module?suppose i am offering a cisco WS-C2960S-24TD-L switch, and want to add 10G module, from whrer i get the part code of the modu...

Hello,I am interesting if it is possible to configure DHCP Server on 3560X switches in such way, that when PC takes ip address, this ip should stay to that pc permanently even after reboot.

Hi,I have a Cisco CBS3020-HPQ chassis switch running IOS 12.2.(25r)SEF3.  One of the ports is in "disabled" state but when I try to unshut it, it doesn't work, the switch logs shows the following event:%PLATFORM_ENV-3-LOOPBACK_PORT_POST_ERR: Gi0/1 ca...

Hi, I am attempting to setup total 8 VLAN’s on a cisco C3560X switch that uses a Sonicwall NSA as the gateway. The VLAN’s need to be completely separate from each other but able to get ip(DHCP) and access the internet via the Sonicwall. My ip plan is...

Hey everyone, I have a question to ask that I am not understanding.Lets say I have one router (R1) and two switches (S1, and S2). I have 4 vlans, VLAN 10, VLAN 20, VLAN 30, VLAN 50. My interface on the router has subinterfaces setup. fa0/0.10 = 10.1....

We are deploy a upgrade and we have a doubtWe copy the new ios software to the sup and slavesup. After the reset on the slavesup, it is coming up, we can see the boot process, but the console access stops unexpectedly.In the Active Sup we can see all...

Hi,Does anyone know how to find ttl from ping on cisco devices?For example on windows I can find outPinging 8.8.8.8 with 32 bytes of data:Reply from 8.8.8.8: bytes=32 time=40ms TTL=49Reply from 8.8.8.8: bytes=32 time=41ms TTL=49R1#ping 8.8.8.8Type es...

Hi,Yesterday I had to connect a media converter (fiber to ethernet) to a Cisco 1841 router, but at the time I did not have a crossover rj45 cable, so I thought I just made 2 ports in a separate vlan on a 2960 switch to link them together, but I was u...

Hello expert,I was put up with a strange question by my lead and i couldnt reply him back. Could you please help me out.The destination im trying to rach is only 2 hops away. The First ping response took 25ms , second and further responses are only 1...

hii have a problem in my network i can`t handle in myself6 routers in network running ospf & 2 of them are asbri call them A & Brouter A is a broadband BRAS with some static routes that has been adverised to ospf, some connected routes & a tunnel to ...

what is the correct answer of attached question