Switching

I need some troubshooting help to solve this issue. We have 2 managed routers "A" and "B"across the service privder's VLAN network. The set up is like this->Router A---VLAN "X"--> ISP ATM Switch A<----->ISP ATM Backbone<-----> ISP ATM Switch B<--VLAN...

Hi all,I came across some discussions about GLBP with STP. Like Figure 41 at http://www.cisco.com/en/US/docs/solutions/Enterprise/Campus/HA_campus_DG/hacampusdg.html#wp1108611Cisco's description is wrong there. Even the link between the two distribut...

how tcp/ip layers work.describe function of each layer---Posted by WebUser Razi Hassan

Hello,I'm getting lots of problems with dot1q-tunnel on my test lab.In fact i receive traffic on a one client per vlan basis (traffic is PPPoE), i receive all this traffic on a router, collecting all these vlan on a bridge where the pppoe packets are...

I have two 3750G switches stacked together however it's not in a full ring configuration:Stack Ring Speed        : 16GStack Ring Configuration: HalfStack Ring Protocol     : StackWiseAnd as shown below it's obvious which cable is not working:show swi...

Hi,I’m having an issue with spanning tree protocol. All my network is configured with 3750 switches. I have,. Two core switches. Seven stacks as access switchesAll stacks are connected with two fiber cables to the main core switches. One fiber to pri...

Using one 3560 switch,  I would like to create 3 vlans. As followsvlan 5          10.10.10.2      255.255.255.252     vlan 10        10.0.0.1          255.255.255.0vlan 20        10.1.0.1          255.255.255.0vlan 5 connects the switch to a PIX for ...

Good afternoon,I am currently trying to figure out if it is possible if a router has 4 different networks to assign a different gateway of last resort other than0.0.0.0 0.0.0.0 Dialer 0 for one network.e.g. Network 172.16.16.0/24 is configured on the...

tell me about working of different layers of internet protocol suite---Posted by WebUser Razi Hassan