Hi,Can you explain the sh route in red? What path would it take to get to 10.245.65.4/30? I did a traceroute and am still confused.TIA.PFsh ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O...
I purchased 128MB compact flash for my supervisor module WS-X4515 on my 4506 switch. Part number for compact flash is MEM-C4K-FLD128Mout of the 6 that i have purchased, 4 of them were bad, it get a %Error opening slot0:/(Bad device info block).i can'...
Hi All,We have 2 sites(A and B) in london and are merging into one site A. Switches from the site B will be reconfigure for site A subnet. We are also extending site A from 3rd floor to 5th floor.we are using 10.9.1.x in site A. Plan is to use fibre ...
I'm having an issue which I believe is either HSRP or STP. I have 2 - 6513s as my core switches with VLAN interfaces and spanning tree configured as in the example below:Core 1interface vlan 100 description XXX ip address 10.123.100.2 255.255.255.192...
Hi AllI have 10 cisco Switch 3750 in LAN. All these are in connected in Ring. All those are configured with multiple VLAN's and Routing is also enable. I want to enable STP on all these switches. In case if any links drop between two switches and aut...
Guys,can you please advice me with a switch selection ? I have a 7204 vxr router , that i need to connect with a switch , now as per my client they will be using a high no of Ip addresses ( around 120000 ip's -- using around 90000 - 100,000 most of ...
HiI have a friend who rents out 14 small offices to small companies.He has asked me to help him setup the network infrastructure, however I have some questions that I hope you could help answer.All the offices are already cabled back to a central rac...
Hi,I want the laptop with IP address 192.168.75.13 to be able to access the file server 192.168.10.254, but still keep the internet connection of the laptop through the SR520. I'm not sure what modifications I need to make to the SR520 to link the tw...
Hi all,we have a Cisco 3750G running with IOS 12.2.35 SE5.When i did a sh env all i got the following output:nusex021#sh env allFAN is OKTEMPERATURE is OKTemperature Value: 54 Degree CelsiusTemperature State: GREENYellow Threshold : 56 Degree Celsius...
I have several 28XX and 38XX routers deployed. I want to dual connected them to my Core switches. Should I configure them as two different layer 3 subnets and let my internal routing protocol EIGRP load balance or should I configure the two interface...
With regards to IP precedence on a 3560 is it fair to say that 'mls qos trust dscp' and 'mls qos trust precedence' both achieve the same thing? Trust DSCP trusts the Class Selector whereas trust precedence trusts the IP precedence which is the same ...
Hi every bodyI have a question.l2sw is layer 2 switchl3sw is layer 3 switchh is hostp is port====================Let say we have a set up as:l2sw--trunk------l3swl2sw:p1,p2 are in vlan1,p3,p4 are in vlan2h1 is connected to p1h3 is connected to p3l3sw...
