Buy or Renew
Buy or Renew

Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation

Get 20% off switches when you combine Cisco solutions

 
Labels

Forum Posts

Start a conversation

Limiting BW to a server **anybody??**

What is the best way to limit bw to a server? Here are the details. Server is connected to a 6500 that is running on a sup720 catos/ios hybrid code. The server is connected to a layer 2 gig switch port.  I have offsite users that connect to this serv...

Remote xmodem

I have an old 3640 that I inadvertently uploaded an IOS image to that will not boot. It keeps reloading to rommon. It's part of a lab that has a 3700 series router with console access via an NM-32A. I was wondering if there's any way to do an xmodem ...

Resolved! LAN QOS (on C3750) strategy

I'm working on implementing a classification and marking strategy for my network.  I've put together some syntax and have recieved some input from others about configuration but would like to know what you think.  These are the requirements;1 - Class...

Resolved! Multicast issues

Hi All,I have an issue regarding Multicast. We recently upgraded a control system network using 3750G in a "ring" topology, which was running several types of traffic (CCTV:roughly 100 cameras, SOS telephones etc).  Where we have been trying to intro...

STP

I am getting this error frequently on a 6509 switch:" (enable) 2010 Mar 19 08:20:02 PDT -07:00 %ETHC-5-PORTFROMSTP:Port 9/42 left bridge port 9/422010 Mar 19 08:20:03 PDT -07:00 %DTP-5-AUXVLANPORTOFF:Auxiliary vlan removed on port 9/422010 Mar 19 08:...

Resolved! NTP recurring

Hi  All,Please help me to understand the situation and solve it  My devices start to run on BST  two weeks earlier that it actually DST starts on Sunday, 28 March 2010, 01:00 local standard time DST endson Sunday, 31 October 2010, 02:00 local dayligh...

how many FWSM in VSS (6509-E) ?

Hi,We will be implementing  VSS with FWSM.How many FWSM modules do we need for this configuration?  >> one FW module per 6509-E at minimum or can we use only one FWSM per VSS ?I have tried to find any recomendation on cisco doc , but without success,...

6509

when we power up the 6500 chassis one 6516 and 6348 module didnt come up.sh moduleMod Slot Ports Module-Type               Model               Sub Status--- ---- ----- ------------------------- ------------------- --- --------1   1    2     1000BaseX...

Router Interface Cards

Hey all!I am going to get a new G2 Cisco 1941 router, but the only option in my area is a 10MB down and 2MB up COAXIAL service... Do you know what would be a good WIC card for the 1941?Any help would be appreciated!

Resolved! IP SLA Recurring

Hi All,I use an snmp tool to monitor IP SLA results. This works fine, but in testing this setup i noticedthat the Monitors i setup created a new collection index after the previous has completed. This happensafter 720 operations.See config belowrtr 1...

Resolved! NAT?

Hi all,One of our customer have a network with the next design:In their servers they have configured IPs only from the range 192.168.235.0/25.All the petitions for their servers come to one of the PUBLIC IP addresses and we have to configure static N...

Resolved! 802.3ad - LACP configuration on 6500

Hi all,6513-1 & 2 connected via Etherchannel. New  backup server connected (dual NIC/Teaming) and it has the Team option: 802.3ad Dynamic with Fault Tolerance. Iam wondering if we enable  'LACP' passive on the 6500 interfaces (where the server NICs c...

View All
Review Cisco Networking for a $25 gift card