Switching

whenI want my vpn to use a windows radius server, do I need to tell my router or pix what group in windows its using ?

Hi allIs it possible to block workstations on a lan from seeing the HSRP messages going between the routers? The scenario is 2 x 7200 routers configured for HSRP each connected to a 2950, which are in turn connected to each other.Thanks, Henk

Guys, Can you help.In the type 5 (hello packet) there is another eigrp release version 1.2 apart from the version 2 in the same header.This version 1.2 does not appear in any other eigrp packet type, so can I assume this is the revision of the hello...

Whats the best way to connect 2 4507 switches? I need to connect 2 so that we can have redundant switches. Is there a special interface and cable that will give me very high bandwidth?If possible could you detail the parts needed.All posts rated.Th...

guys, i have a net with 3 pc 's at my office with an internet connection via adsl. I also have 1 pc in my house. How can i get connected remotely so as to monitor the office network.( details pls)

I understand that when you are going to summarize from your two distro switches against the core network, you are requered a layer 3 linke between the distro switches. But if you dont have this posibility and have to use L2 can I just skip using summ...

HiiCan any one plz tell me that what actually happend during booting process?(i)what is the significance of config register(ii)where the configration file & IOS image saved ?(iii)is that both can be saved on same place i mean flash or bootflash, I j...

Dear All,I am testing the sup1A in my test bed with only chassis without any line modules. I am getting the following console errors.I have ios image and bootldr in the pc card (slot0:) From sp Rommon after the cmd "BOOT=slot0:c6sup11.......... " it...

HiIf I fromate flash in running router and not boot the router then any problem ?.my intend in running way at first i formate and load another image.ThanksBiplob

we are using switch 3560.. our switch is running on network 192.168.4.0 but. sm server we want to attach it is from 192.168.5.0 series , now what we want at switch is that we take one switch network series ip such as 192.168.4.7 & implement NAT to c...

6506 sup1a image corrupted, downloaded image via console after downloading, sup1a uncompressed the image but failed with this error:Uncompressing file: ######################*** TLB (Load/Fetch) Exception ***Access address = 0xfffffdc0PC = 0x8001060...

Hi,Can you connect 2 switches with different native vlan? For example port gi1/1 on switch A has native vlan 1 and port gi 0/1 on switch B has native vlan 2. Please refer interface snapshots to below.The ports connecting switch A and switch B are a...

Howdy,Can someone provide me a link for documentation on how to set up my Catalyst 4506 for HTTPs so I can connect to it using CNA