Hello All,I would like to understand the root cause for ignored packets , I have a 2811 router with 2 FE I'm seeing input erro /ignored packet count increasing on one FE which is connected to the service provider - 30 Mbps Ethernet circuit.As per...
Hello All,I would like to understand the root cause for ignored packets , I have a 2811 router with 2 FE I'm seeing input erro /ignored packet count increasing on one FE which is connected to the service provider - 30 Mbps Ethernet circuit.As per...
I don't know where exactly to start from. So instead, i will jump right on to the question.Say you are being provided with 2 IP addresses, PC 1's IP address and PC 2's IP address, which are 17.4.4.2 and 14.2.3.2 respectively. You are required to fin...
Got a strong feeling that the lifespan of high end and chassis based Campus switches are longer then the switches that have fix port configurations.Unfortunately I can't find any document on cisco that supports this feeling.E.g. lifespan different be...
The server 10.6.22.10 I'm pinging resides on FastEthernet0/0is 10.6.1.1/16. If I send the ping from f0/0 I get reply -below is the output:Packet sent with a source address of 10.6.1.1!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 1...
I'm trying to configure in a 877W a connection to a DSL. With the configuration below, I can ping from the router any Internet address but from any PC on the network I can't. Can somebody tell me what is wrong?no aaa new-model!!dot11 syslogno ip sour...
hi! we're given 2 range of ip to use 172.16.2.0/23 and 172.16.4.0/23. will there be any issue if i would to cut the 172.16.2.0/23 subnet into 1/2? eg. 172.16.2.0-172.16.2.254 and 172.16.3.0-172.16.3.254 (which is /24)?or172.16.2.x/23 and 172.16.3.0/2...
I have a situation where a client has a mixed vendor network. The client needs to be able to open SSH v2 sessions from one device to another in a "hop-to-hop" situation in case of faults.The issue arises when trying to SSH from a cat6500 to a Nortel ...
Imagine I have a 2950 switch. Switch is connected via port fa0/48 to 3750 Layer 3. On 2950switch, switchportports fa0/10, switchport access vlan 100. A host is connected to that port and I can ping it OK.Then technician attemtpts to connect same func...
Hi,I have the following doubt:In my customer switches the NTP server configured is located in US and hence CST time is being used. Also the switches send syslog messages to a syslog server also located in US and working with CST times.My question is:...
I need to send a technician to a decomissioned remote site with no wan connectivity to clear the configs on a Cisco 871 router and 2950 switch. Is there a button sequence to press to permanently clear the config without requiring console access? Th...
Hi Folks,I have a dilemma I need a little help. I have 2 3750 that I need to deploy as network Core/Distribution with 2 ASA's. I wanted to find out it will be more advantageous to stack the switch or do it the old fashioned way with HSRP with port ch...
Hi, is it VTP Transparent mode ?regardsNeo
Hii have 5 vlans configured and two links to internet (172.17.6.254 and 172.17.6.253) i need that vlan 2 and 3 go to internet through 172.17.6.254 and vlan 4 and 5 through 172.17.6.253 how can i do this?
Hello,Can anyone explain how PBR works on the Sup 6-E? I'm able to create a route-map with match and set conditions, however I can't apply it to an SVI or other L3 interface (ip policy route-map ...)Can't seem to find any more online doc with any sub...
When PCs get an IP from DHCP on our router, they can normally register themselves by name in Active Directory DNS. But other devices like printers can't.Can IOS DHCP with dynamic DNS register its DHCP clients by name in Windows Active Directory?If s...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-23-2025 01:45 PM | ||
07-08-2025 11:44 PM | ||
07-04-2025 02:13 AM | ||
06-26-2025 10:05 AM | ||
06-16-2025 07:47 PM |
User | Count |
---|---|
13 | |
11 | |
9 | |
5 | |
4 |