Switching

Dear Experts ,I would like to know whether the following switch supports trunking or not ?Switch model: WS-C2912-XL-ACS01#sh versionCisco Internetwork Operating System SoftwareIOS (tm) C2900XL Software (C2900XL-C3H2S-M), Version 12.0(5)WC7, RELEASE S...

can i populate a 48 port 3750 gigabit switch with 48 cisco ip phones ?

We added a new vlan (vlan5) in an FWSM context with "nameif inside1" and IP address of 10.10.1.1 mask 255.255.255.0. Routes are set on the router. The interface and line protocol are shown as down. A "no shut" does not enable the interface.Help? ...

We are in the very beginning stages of evaluating HP blade servers for our enterprise. The blade server uses the 3020 switch for uplinks and internal LAN connections. I've looked at the switch configuration and have a pretty good idea of what needs t...

Hi all,I have a 3560 switch with version -(C3560-IPBASE-M), Version 12.2(25)SEB2.whenever I reboot the switch it will take 20 minitues to come into normal mode. Upto 20 minitues the "sys" LED will be blinking. I tried upgrading IOS still I'm getting ...

HI ALL!!!!Pleas help me, I want to download a new image file with "/owervrite" comand,but I have a problem, I dont have "archive download-sw" comand on my swith.... Help, What I must do??

Hi all,i want to give priority between hosts in the same subnet.for example hostA,hostB,hostc,hostd.i want to give priority to traffic b/w hosts A&B than hosts A&C.how may i proceed?thanks in advance

dear all,please explain the difference between switch stacking and ether channel bundling.thank alotraj

hi everyone, i m starting my wireless studies but there are few concepts that i m not getting on, first is BANDS and CHANNELS, i m not at all getting as to what they are but like many of u know how much they are of use in wireless, so can someone tel...

Hello,When I type this command in by using hyperterminal I get the Ip address of 1. Can anyone explain to me why? I am new in the cisco world and could use your help.Thanks,Lon

We have an environmet with a 6509 in top whitch is the root for the stp and 150 operational VLAN's. We applied vtp pruning to the domain but we did not get results.All the VLAN's are in the non pruning state at trunks.Has anyone had the same problemI...

hi can someone tell me how to install a static route based on certain condition ? and remove it if that condition is no more met ? i know that there is a way of doing it but i m not able to remember how so some one help me out on thisthanks

Hi,I would like to upgrade my Cisco 6509 catalyst switch?s CMM module IOS with new image. I need all steps how to upgrade the IOS with commands. RegardsKishore.