Switching

I'm hoping this is very simple. I want to simulate a 128K speed network connection for two XP PCs I have connected to a Cisco 2950 switch. The two PCs can communicate at 100Mbps, but I want their connection with the rest of the network to be limite...

3845 is running code 12.3.14T(5) and when it reboots it loses its wink statements.

we hv 512 kbps lease line from provider between our end & our retiler end.mrtg showing 300 kbps input & 360 kbps output . do we assume it going out of limit as 300+360 =660 kpbs as we r suffring udp packet loss as our server send 700 udp packet but c...

One document says IEEE 802.af supports both 1,2,3,6 or 4,5,7,8 cables pin to deliver power. So how does it choose?

We have a backbone of three Catalyst 4006 switches, all connected at the Supe II module. The network has no VLAN's other than VLAN1. One switch was replaced with a 4507R and when it was configured the technician put the following trunking statement...

Hi, We connect two 6509 switches with 6704 10GE modules. However, we found 4 ports can not up at the same time. we checked the fiber links. GE sfp works well. Currently, the 6509s installed 1*6704, 1*6724-SFP,1*6748-GE-TX, 1*FWSM and 2*3000 AC power ...

I have a client that has router which has some static routes that are disappearing from the route table. The links are still up and the next hop is still pingable so the route should not be disssapearing. Does anyone have any ideas ?

Is there a way to limit the bandwidth consumption for each user on the network? I am currently using a Cisco 3750 and was wonder if there is a solution for limiting user bandwidth consumption.

I have a small network in a grade school with 30 computers in a "computer room" of the school. 1 of the computers is a windows 2003 server. I have 10 (grades pre - 8)rooms with 3 computers each in them. Ethernet line comes off of switch in the "compu...

I am in the process of upgrading Sup's on my 6509 core. I have 2 questions regarding this.1. With the switch running a Sup1 mod in slot2 can I install a Sup2 mod in slot 1 and automatically revert to the newer blade without rebooting?2. Will the swi...

we have two CE500 and two 3Com Hubs. One of the CE500 using as core switch. Since, all other CE500 and two 3Com hubs is too far away. We need to use 3 fiber cable and 6 fiber converter to downward to UTP connecting to the Core switch (CE500). However...

I don't believe there is a solution to this but you all may have something to say.Scenario: small branch office with a full duplex T1 access circuit to a frame relay provider. The frame relay provider provides Internet access. Addressing on the seria...

I am having an issue networking a Cisco 4507R and Catalyst 2950 Series. I have only worked with simple vlans so please forgive me. They havethe same encapsulation and everything seems fine to me but I can't pingbetween them. Here are my configsCata...