Switching

i feel really stupid asking this question because i've been told before but i cannot find anything on it at all. here is what i need, i need to forward all traffic going thru the switch to a specific port to be recorded. i believe it's somewhere arou...

I have Internet pipe from data center poeple. This pipe is directly going to cisco 2950 24 port switch(in public VLAN). I have another same switch trunk with primary switch.now in my production setup switch1 is the single point of Failure. Some body ...

I couldnt find anything on the website about this?would you please post me a link?thnaks!

We're running Cat-2950 switches and MSFC's (release 12.1(13)E) and I ned to set the number of invalid logon attempts and password minimum length on those network devices. Have not been able to come up with any docs on it - can anybody please help?Tha...

I was advised that gigabit oer Ethernet will only send and receive data at 500Mb/s and the overall transfer rate of sending and receiving is 1000Mb/s. Where can I confirm the above info. is correct ?

I am gona buy workgroup switchs in 3days..I am confusing to choose ones.The followings are required.<<SWITCH 1>>(packets switching over 38.7Mbps).1.24ports.2.FabricSwitch Bandwidth: 28Gbps3.supporting 10/100/1000 Mbps Ethernet ports each(over 24 port...

I want to know if a HWIC-4ESW card can be installed on a 1721 cisco router or only on 1800 or 2800 series router ?Regards

Hello, I was wondering if anyone could suggest some good links/docs for examples on configs for Desktops and Cross Overs between switches. We're currently running 2950's in a school/lab environment. I've seen some of the smartport macro's built in th...

Hi, Guys, I was trying to find some reading material about Fallback Bridging, but couldnt, if you have,would you please post a link for me,thnaks!

I'm building the network for a retirement community that may eventually provide internet access to each of the 200 resident suites. To ensure that one resident cannot see any other resident's LAN, I was thinking of breaking each room into a separate...

Hi,Problem is that when we connect D-link(16 port) uplink to cisco switch-2950(24port) the LED on cisco(port.1) do not get green it remains orange but other ports working ok.but we can not get conneted to D-link Switch.what cable color & standred do ...

I am setting up a network in my dormatory for myself and about 20 friends. about half of us have DSL connections at the moment. Is there a way to have all the DSL connections (possibly run through cheap home DSL routers) all connect into a cisco rout...

I have to analyze capture to sniffer for a problem about reply DNS that don't working fine.Does somebody advice me an document that can help me to interpreted this trace?best regardsLorenzo

i have a IBM T-42 without a serial port. how can i console in? i have tried a console cable from cisco that has a 25 pin connection but no luck.thanks in advance.

Could someone please post a link about SC0 interface? I couldnt find.thanks!