Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...
Forum Posts
Resolved! LACP between Cisco ASR 9006 and Huawei
I need to configure LACP between Cisco ASR 9006 and Huawei device. But I couldn't found any doc or related material. Can find LACP between normal cisco ios and Huawei configurations over the Internet. Not with IOS-XR. Please help...
I have questions about StackWise Virtual on C9500-24Y4C and I have module QSFP-H40G-CU3M. It can use for StackWise Virtual?
Hi Everyone,I have 11 networks configured in the Packet tracer. the 5 networks on the right are configured with the static routes. And 5 networks on the right side which are configured with dynamic routes. There is an 11th network "192.168.10.0" thr...
Dear Team, We have 4 cisco catalyst 2960s switches in stack, after some changes on switch we put write memory command that time we got startup-config file open failed (Not enough space) Error. Error- startup-config file open failed (Not enough space...
I have a functioning network of Packet tracer and I need some help with my ASA firewall. I need to know what type of firewall, the address scheme inside and outside of the firewall and how to program the ASA firewall to allow DHCP request and replies...
Hello All,I am struggling to understand how EEE-"Energy Efficient Ethernet" works on Cisco3560cx. While doing some research I came across with some docs from Cisco. Reading other articles on EEE, I understand that when both end devices have EEE enabl...
We want to connect two PaloAlto Firewalls (Active-standby pair) to our Catalyst Core Switch. Each firewall's two port will be connecting to Catalyst Core switch. Can we Bundle all these 4 port (2 from each Firewall) in single port channel. Note: At a...
Resolved! Turn On NTP Distribute NXOS
Hi Guys,I had posted something yesterday on NTP not working. I just noticed that NTP distribution is disabled on the Nexus C3548P. How do I turn it on?I have included outputs for the following:-Sh featureSh versh ntp status-CSW-001# sh ntp stat^% Amb...
Hi everyone since I am new to Cisco tech I'd like to know Can Switch C9200L-48T-4X-E be the OOB Switch? or do we have to use the Advantage License? any suggestions are appriciated thank you
Hello all, I have a NAS with 4 sfp+ port in it and i configure trunking with 802.3ad dynamic mode, and then i configure vlan on that port. i connect those 4 sfp+ to unmanaged switch and from that i use rj45 to connect to my switch which is sg350. in ...
Hi all,in cisco switch like 3560,2950, there is a command test etherchannel load-balance interface port-channel X ip x.x.x.x x.x.x.xto test how the traffic distribute between the etherchannel, however, seem this command is no longer available on IOS ...
hi,i'll upgrade a cisco 9200 switch and noticed there's two flavors: plain IOS-XE and with NPE. which one do i choose?https://software.cisco.com/download/home/286320176/type/282046477/release/Gibraltar-16.12.4cat9k_lite_iosxe.16.12.04.SPA.bincat9k_li...
Hi Everyone I have question is LACP same with VSS on Cisco Switch Cat 9500 ? if we have to use LACP do we have to buy the Advantage Licensed switch? Any suggestion are appriciated Thank you
My existing Connection is on a 2960x-48 port switch. I tried to migrate to the 9200 catalyst switch with the 10Gig fiber module. However the fiber does NOT come up. Any idea why and what can be the issue?
Resolved! Packet Tracer, Help me
Hi, I need help with my PKT.. I should be able to reach R4--ISP from PC5.. But it doesnt work. Can someone see where my problem is? Because i cant get this to work..Password is dt153g & L2. Thank you!
