Hi, Just want to know what are the minimum hardwares required to test the telepresence in lab.
Forum Posts
Hi All, I was just looking to know what the process is for adding an additional camera to a Room 70 Dual setup? Is this possible and if so can users pick between the two cameras, for example which one is the Main Source? Also can both cameras all...
Resolved! DX 80
I am looking for some type or remote control for the DX-80. One like the old Tandberg does anyone know if there is one available?
Dear community Does Expressway can log System Alarms Messages on syslog servers (for example a software failure) ? According to documents, only signaling events can be log into syslog. Thanks Alex
Dear Colleagues, Currently I am planning to intergrate our CMS/TMS based environment to the local SfB, but I am stucked in TMSXE/OBTP configuration and I need a guidance.The call interoperability works, but I would like to achieve higher integration ...
I have been led to believe that if a conference is scheduled several hours in advance that TMS will run diagnostics for system tickets that can affect call setup. Does anyone know when/how frequently these diagnostics will be run. for example is it 5...
Resolved! EX60 touch pad problem
Hi All,I have problem with EX60 touch panel, when I connected it to the unit the touch still hang on exclamation LED and the screen keep black without any response, I did factory reset without any results, when I typed xstatus systymunit the cradle r...
Resolved! Mic problems with SX80
I'm hoping someone here can offer some assistance with a problem. I've a client that we've done a new install with 4 Shure MX202W/C microphone connected directly to the SX80. At first there was an actual problem with the codec that required RMA, ...
Hi All, Is there any specific requirement for the TMS & CMS deployment for the DID numbers Any design criteria we need to take for the CMS deployment in terms of Direct calling to space We had Cisco CWMS ,now we moving the CMS ,There we had...
Resolved! Calling from Room Kit Plus (P60) to MXP
Hi all, RKPlus CE9.3.2 - calling to MXP F9.3.3 over any bitrate higher than 512k produces badly pixelated image on both ends, with ghosting and delays. 512k works beautifully. I know the MXP is an obsolete piece of equipment, but would be happy to ...
We have multiple clients looking for the Frame that comes in the package with Table Mic 20 and 60. We have been searching for a part number for this item with no success. Does anyone have any idea what the part number is and if we can order a few d...
Hi all, SX20, CE9.3.2. Doesn't mute itself upon auto-answer. Checked the config, even reset it to the factory settings - nothing helps. Didn't find this in known issues or bugs. Please advise. Thanks.
Hi! We have recently changed the settings for videoconferencing to register with CUCM.We currently have a compliance service that verifies that all equipment is set to a certain standard.It turns out that whenever we register a videoconference (ind...
Hello! I have a customer who is willing to switch from SfB to Jabber but one problem I cannot solve. Customer is used to having SfB meeting plugin for Outlook which they use when conference needs to be scheduled. That way every participant receives m...
Resolved! SX80 with a 12x camera
Current documentation indicates that an SX80 will support a single 12x camera (with limitations, like no daisy chaining support, and no software upgrades from the codec). It does not stipulate which 12x camera, and I recall that there are 2 generat...
