TelePresence and Video Infrastructure

Resolved! SX80 edit layout for Local and Remote presenter room modes

Hello. We have an SX80 codec with triple display, SpeakerTrack60 and PresenterTrack60. We have set up the room type to Briefing room. SpeakerTrack dual P60 are mounted in the front center of the room with monitor 1 on the left and monitor 2 on the ri...

Invitation Template is not being applied on WebRTC

Greetings, I am configuring a new CMS 2.3. I've finished the invitation_template file and copied it to a web server. The template had been applied on the Meeting Server App, but WebRTC does not use it from some reason. Can anyone suggest how to t...

Cisco TMS\TMSXE amd CMS

Hi We have a new install of Cisco of TMS\TMSXE and Cisco CMS, currently we have existing meeting rooms that are allocated in exchange as resource mailboxes, is it possible to use the existing rooms as resource mailboxes still and have TMS\TMSXE se...

TMS on register Roomkit plus error

Hi guys I use TMS and I'd upgrade it ver.15 -> 15.6.1 but still can't register Roomkit plus on TMS when I try to register, TMS will show me this error message "Index (zero based) must be greater than or equal to zero and less than the size...

How to install

When we install the licenses in CMS

Need Help on SX10 Configuration....

We have a Spark Room Kit and (9) SX10. We would like to be able to configure the SX10 to function like the Spark Room Kit. The end results would be able to leave the wall selector plate on Video Conferencing and for the SX10 to be able to pick up Pro...

Expressway-C to IM&P: "AXL query HTTP error "'HTTPError: 404'"

Hi team, We are facing this problem with Federation (Expressway C|E with IM&P). The services like MRA and B2B is working fine. In debug we have this information below: 2017-08-17T14:24:50.893-03:00 ACMEIMPSERVER 1 management: Level="WARN" Event=...

VCS Control/Expressway migration to VM

Hello, I know there are several topics on this subject, but I couldn't find the answer to my questions. So, what would be the recommended way to migrate VCSc and VCSe appliances(running X8.2.2) to VM? 1. Deploying X8.2.2 VM, migrating the option ke...

Resolved! Which TCP/UDP Ports are used by SX10/SX20 when I dial into a WebEx meeting?

Hi, Which TCP/UDP ports are used when I try to connect to a WebEx meeting from SX10? And how can I check if UDP ports are blocked by ISP? I can check TCP ports.

Resolved! Cisco WebEx Telepresence Quick Start Guide

Hi, I'm a CCNA (200-125) and I'm totally new to collaboration. I have been assigned to deploy SX10, SX20 at a client premises. Client has also bought WebEX Named user licences and I also see cloud storage as well as CMR cloud. There is no CUCM. I...

Resolved! Cisco TelePresence System 6000 MXP

can anyone tell me what this is worth 2nd hand? I picked it up at an auction Cisco TelePresence System 6000 MXP codex - Video Conferencing Device any suggestions where best to sell it? Ebay? Gumtree? thanks I'm in Australia

Resolved! Questions around MRA and SME cluster

Does anyone have any experience or insight around using a single cluster of Expressway-C/E to service multiple CUCM clusters behing CUCM SME edition? Reading through the MRA deployment guide, it does mention deploying MRA to multiple CUCM clusters,...

Resolved! With the EOL announcment, what product is replacing the SX Series codecs

What is in line to replace the SX series equipment? Hopefully there will be more choice as with the C series, and not a one size fits all like the SX80. The SX series replaced the C series - which in my opinion had a better choice of products to fi...

SX80 and Precision 60 Camera Control

Hi, I'd like to know if it's possible to use a vlan to connect camera control. I usually use a direct ethernet cable between camera control port and SX80 port2 and it works great. But with the following design it doesn't work : SX80 PORT2 <--------...

MX800 Rebooting

Have an installation that is running latest CE 9.2 code Seeing the MX800's spontaniously reboot in the middle of a point to point call. Is anyone else seeing this? Any suggestions of what to look for in the logs?

TelePresence and Video Infrastructure

Forum Posts

Resolved! SX80 edit layout for Local and Remote presenter room modes

Invitation Template is not being applied on WebRTC

Cisco TMS\TMSXE amd CMS

TMS on register Roomkit plus error

How to install

Need Help on SX10 Configuration....

Expressway-C to IM&P: "AXL query HTTP error "'HTTPError: 404'"

VCS Control/Expressway migration to VM

Resolved! Which TCP/UDP Ports are used by SX10/SX20 when I dial into a WebEx meeting?

Resolved! Cisco WebEx Telepresence Quick Start Guide

Resolved! Cisco TelePresence System 6000 MXP

Resolved! Questions around MRA and SME cluster

Resolved! With the EOL announcment, what product is replacing the SX Series codecs

SX80 and Precision 60 Camera Control

MX800 Rebooting

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

What it means "HttpProxyStatus"

Cisco Quad Cam default preset

To configure ttc8-02 standalone as webcam

Loop detected on my Expressway when outside entity calls my number

Pre-registration of Lifecycled evices into Control Hub Workspaces

How to build a UI extension to start WebRTC calls?

ROOM KIT EQ programing question

Query on CS-KITPRO and CS-KITPLUS

Cisco Video Device Registration - 12-digit pin enquiry

Spark Room Kit Upgradation