TelePresence and Video Infrastructure

Does anyone know what would cause this on our MX300 VC, picture attached was taken from a laptop via teams connecting to the MX from external. Picture is ok for first 5 min then this happens and stays the same until call ended ?Picture on MX 300 is f...

Topology - CMS - ISDN GW - VCS Edge (11 Rich Media Session License) and VCS Core (1 Rich Media Session License)Hoping this is a License Issue only. Issue - When a VTC session is active on CMS - no issue with the total number of Video Endpoint can par...

Good day , Is SX20 compatible with the roomkit plus Codec ?   Regards Tshepang

I have what I hope is a simple question.  We have about 100 Cisco Room-Kits across several campuses.  We use a third-party to create and maintain our code.  Part of this creates a custom layout on the Touch-10.  We also have a control system in the r...

Hello friends,   Can anybody clear for me , whether CUCM 12.0 support Cisco TelePresence Codec C60 ( end of life )? I even tried with 11.0 version with no luck   Thanks in advance

Hi Team, We have a customer with MX 800 ,but they don't have existing CUCM, expressway /WEbex Cloud to register the same ,how we can proceed with stand alone configuration. Is there any specific doc which explains the steps ?

Greetings, Kindly advise how to connect Cisco Webex Room Kit Pro and deskpro to WIFI network of customer as the IT there was saying that wifi is not supported on KITPRO but the datasheet mentions wiif is available. Need wifi access for connectivty to...

We just got our first shipment of Room bars. The first two have gone like this:- Out of the box, Room Navigator works. Enter the 16 digit code, cloud registered.- System downloads latest RoomOS 10.19.1.l4t-5 6bc1d6a8316 and pushes latest fw to Room N...

I have a Codec Pro with outputs to three displays and inputs from two laptops. Is it possible to display (not share) two laptops to two of the displays? 

Hello friendsI am new in WebEx, I want to install WebEx version 4.0.1 in Vcenter 7 via .ova file. I get an error in extracting .ova file.Service unavailable ....The size of .ova file is 18Gb.Any suggestion?

Hi, I am interested in using 2x PTZ cameras in Classroom mode using a Room Kit pro device. I understand from delivering a similar solution using Speaker track and P60. I do know it works with speaking tracker but read that other cameras can be used. ...

Hi Guys,   I have a VCS Expressway X8.10 with dual NIC static NAT configuration.   Currently the default gateway points to the gateway on the internal interface.   The Cisco config guide says to set static routes pointing to management devices to the...

We are running Cisco TMS version 15.13.3 and its running very well and has for many years.TMS Login/Authentication is using IIS and Integrated Authentication to use our company login credentials for TMS Login.Recently there has been a push for MFA (M...