TelePresence and Video Infrastructure

Hi,I have a user getting 'No Status' when trying to subscribe to certain users (adding as a favorite), setting the client to TRACE I'm getting the following (using Jabber 4.6)_taf_sip_call_agent_subscribe_rej: Got Subscribe_Rej (reason 487), for SUBS...

Hello community.We are about to upgrade TMSXN from 11.3.1 to 11.3.2 and we have the following questions:- Is TMSXN 11.3.2 compatible with Domino 8.5.3 FP5 ? We can see that Domino 8.5.3 FP3 is not supported, we hope this limitation does not apply to ...

Hello, i have a customer who has integrated Lync 2010 with thier VCSC running X7.2.  the original integration was setup using OCS relay method.  i know that B2BUA is the "correct" way to set this up, but i wasn't ther person who set it up.  my questi...

Good Afternoon everyone, We currently own about ten Tandberg units located at different locations. Their maintenance is about to expire and I wanted to know if anyone had any suggestion as far as any other video conference system that can be integra...

How do i configure my cisco mcu 4501 to be reached by another network with a pubic IP---Posted by WebUser Chinwe Katchy from Cisco Support Community App

As Per spec, nominal ambient operating temp for the C60 codec is between 32 - 95 F.  in our facility 2-3 Codec temp shows 146.3 F...is this temperature too high for codec ?

Hi there,We have a 3241 ISDN which has all forms of remote access and file transfer (appart from https) disabled.We then set https client verification to required.  We can now no longer access the unit on https or http.  There is obviously something ...

                   When we book meetings using the tms scheduler we get an invalid h323/sip conference address.  The system will connect these endpoints, however if for some reason they disconnected and want to reconnect they will not know the correc...

I have a bunch of MXP and C series codecs (along with Jabber Video clients) on my network. They all use VCS-C and VCS-E SIP for registrar and gatekeeper functionality (along with internetworking between protocols).Given the VCS does the translation b...

Hello,We have a handful of the Tandberg E20's that I am trying to redistribute. I have one in particular that is Administrator password protected. I cannot break into it. The factory default options of hitting the ** LAPTOP/PRESENTATION ## within 2 s...

2 brand new SX20's in completely different parts of the world are showing fan errors in the diagnostics page.  Does anyone know if this is a common problem or do the codecs need to be RMA'd?Thank you