I have two room kit EQ units with a USB to serial port adapter. This is connected to a Crestron controller via RS232. I am not getting RX response from the codec. The user LOGIN REQUIRED has been tested with ON/OFF. The baud rate and settings have be...
Forum Posts
Resolved! Video codec AV1 in CMS
Hi Guys !In CMS web app since release 3.9 we can using codec AV1 in web browser chrome.But there some limitation - in chromium/chrome we can receive content but not transmitted in AV1.Question to Cisco developer and engineers when will AV1 codec be f...
Is there a way to show a mic mute button next to the volume control?
Hey In a hybrid teaching room we have a Quadcam(+Room Codec EQ) pointing out towards the students.On the backwall we have a screen so the teacher can see the online participants.See photo. The problem is that the Quadcam thinks that the screen with t...
Resolved! Room Bar - Cisco Table Microphone
Hi Community Could you please help me to understand how can I connect a Cisco Table Microphone Pro (CS-MIC-ARRAY-T) in a Room Bar, if the Room Bar doesn´t have ethernet port for mic?? Thank you for your support Regards
My CMM 3.9 license page shows 'In Compliance Enforcement active, high enforcement in xx days' I have 20 SMP and 15 PMP reserved Smart licenses. I have 2 CMS 3.9 clusters talking to this CMM for licensing, both CMS clusters member servers display 'Thi...
Can the legacy room kit plus be upgraded to new version as one teams room terminal ? can it be used in device mode which means room kit plus can be used as one pc peripherals? including camera, microphone and speaker ?
I connected the Cisco Board Pro 75" using a CAB-HDMI-MUL4K-9M cable, but when I try to share content, a black screen appears.I connected the Cisco Board Pro 75" using a CAB-HDMI-MUL4K-9M cable, but when I try to share content, a black screen appears....
Helloo,I need to configure 4 Yealink SIP-T31P phones on a Catalyst 8200 and this router I have installed a Call Manager Express. So I would like to know what are the steps to follow to register these phones and make them work properly.Regards
Hi there, Has anyone ever connected two cisco quadcams to a single Webex Room Kit Plus? We have a wide, but shallow space where the 80 degree FoV of the Quadcam is not wide enough to capture the entire audience. The client has suggested using two Qu...
I am trying to get the serial connection coming from the AMX controller to communicate with the EQ Through a Db9 to micro usb adapter. Has anyone found a solution for this. Currently on RoomOS 11.24.3.0
Dear Cisco Community,My company has a Cisco Webex Room 55 which was used for conference calls.Since then the company has moved to Microsoft Teams and also offices and the TV was kind of forgotten and only dusted off during a recent inventory control....
We need our Expressway E/C setup to be used strictly for voice calls from Webex clients and MRA phones. In the status page I frequently see video calls and sometimes also rich media calls. The rich media calls usually trigger a license error since ...
Hi, Is it possible to disable the selfview window (picture in picture) when moving/switching the camera from the touch panel?So that we can pan and zoom the camera during a presentation without seeing the camera selfview overlapping the presentation ...
Hey Community On newer video board and on Webex hub i see the option of "remote access" on board main screen but when trying to use it says "Remote Access is not allowed" Any idea?Already set "Remote Access" on Board to On Any ideas.
