Unified Computing System Discussions

Hi Guys I am new in Data Center technologies . An assignment is given to me about Unified Computing and I stuck at converged network adapter configuration . I want to know if we have 250 VMs on a Blade server how we manage bandwidth on each VNIC ag...

Hello Community, We have issue on our new replacement unit which is not detecting the Hard Disks after the replacement. We installed the Hard disks on same location/position on the replacement unit. I got this error messages during boot up. After ...

Is it correct way to bind interface of virtual machine to exact fabric? First, I created dynamic connection policy: Then I used this policy to create virtual machine adapter template: And finaly I created this adapter in virtual switch: Is thi...

I have a device connect to e2/3, from UCS cli, how would I know whether this is B-series server or c-series server? how would i know this device support ethernet or FCOE, if the port mode is vntag, can i say it support FCOE?

I associate a service profile template to the chasis, is it enough to pre-provision the cisco ucs chasis?

Hi All,  I tried to map virtual media on UCS using NFS i got the below error in the logs .   As recommended we tried the green button please see the screen shot attached   I checked in the CIMC logs below is the error    ncutil.c:105:[ncPing]libnc: n...

Hi guys,   I finally got a chance to try and play with Vmware Virtual Volumes (VVOL) today (available in vsphere/vcenter 6.0) and discovered that the UCS doesn't seem to support it.I have a Nimble storage array (think SmartStack) that is running the ...

This has me stumped. 6248UP FIs, 5108 chassis with 3 B200M4 blades running recent ESXi, 3.1(1g) firmware thruout. One of the blades has mac stuck on at least one of the mgmt vnics. The stuck mac is a valid one in the pool, and was assigned at one po...

Hi Guys , We are about to create a new environment, and we want to do it in the best way. I know there are mainly two options for FI to Nexus 5K connections  - let's call it "cross" and "straight" What is a "newer" topology ? And which benefit do i...

i got a c240 m4 server that after upgrading the firmware to 3.1(2e) will not see the boot from san path and now will not boot into the OS. any idea?