Has anyone been able to setup UCS monitoring using snmp v2c for Solarwinds? Documentation seems scares on the interweb and the Thwack support forum on Solarwinds is not very helpful. Does anyone have any good writes up on how to set it up?
Hi; Im using a Cisco UCS 240-M3 server, I have 24 x 600 GB SFF 10K rpm disk, and Im build a Raid10 2 span 10 + 10 disk. 4 global hot spare. Raid Config;Strip Size : 256KDrivers per span : 10Span depth : 2Access-Policy: Read-WriteCache Policy : Cached...
Good morning to all, we just purchase an UCS C220 M4-S, but we only have one HDD, we are still waiting for the second one.I guess there is no problem in start working with VMware and the final VM, and later when the second disk is here make the RAID ...
Hiis UCS central ver 1.1.1b support storage cloud like local zoning and direct attached storage as in version 2.1(3b) ?it seems that this is possible to make a connection policy on the UCS C. ?/Ola
Using Central 1.3(1a) I'm trying to delete some sub organizations that were created as test orgs. Using the old "GUI" I right click and select delete it asks to confirm. I do so and nothing happens. When I try to delete using the new "GUI", it return...
We have two chassis in our lab that were bought with only two power supplies. It's only lab, so not really concerned about power redundancy here. Is there a way to disable all the alarms not having redundant power causes? Just want to clear the cl...
I received some SNMP errors this weekend stating the the port channels coming from my Nexus 5k's to my UCS 6248 Switches went down. This caused a few issues. I am trying to determine if the 6248UP's rebooted. Can you please send me the commands to...
Hi,I want to add Multiple VLANs in vNIC Template through CLIPlease suggest how I can achieve this ? because selecting approx 400 VLANs via GUI is pain-Amit
Hello, As soon as I create boot policies zoning is done ( verified with sh zone command, I can see many zones) yet all the Cisco validated designs and the Cisco example below show that initiator group is required (created during the Service Profile w...
Hi I need to do a infrastructure/server firmware upgrade from 2.1(3a) to 2.2(1f) which I believe its the latest. HAs anyone done this and are they any bugs with going this route? For the server firmware upgrade, I am not sure if I need to upgrade my...
Good morning, all!I'm working on upgrading the vSphere 4.1 currently running on my C210 rackmount servers to vSphere 5.5. I found a document that showed that the server would work with vSphere 5.5 with the 1.4.3u software container. However, when I...
I just created a new vNIC on 2 of my new hosts. I created MAC address Pools before I started. As I create the vNIC I got the following error:Your Changes:Creates VNIC FTNNICCreate:Network Fault ToleranceWill cause a Configuration Failure of:Service P...
Cisco Nexus 1000V - End of Availabilityhttp://www.vmware.com/ch/products/cisco-nexus-1000VVMware is announcing the End of Availability (EOA) for the Cisco Nexus 1000V SKU and its associated support SKUs from VMware effective February 2, 2015. This no...
Dear all, What is the correct procedure in setting jumbo mtu in UCSM. As I understand (we don't have any qos policies defined), 1. We need to set mtu 9216 in Best effort QOS policy in LAN Uplinks manager (qos tab).2. In LAN tab under QOS system class...
