Unified Computing System Discussions

Does anyone know where I can find information related to 6140 Fabric Interconnects and maximum firmware versions? I have several old UCS Domains that are running on 6140s with 2104 IOMs, all 1st generation hardware. I am trying to find some documenta...

Hi,This was a used UCS system and i borrowed it to my lab. I just powered on onyl 6100 from the cluster. No scope command works in this single 6100. I was looking for a command to break the cluster. But could not find one in any confiuration guide. C...

At my customer, who has a large UCS installation, we need to switch hardware “roles” with respect to who is Fabric Interconnect A and and who is B for our two 6296UP v.2.2(2c) Fabric Interconnects (Note: it is *not* with respect to UCSM primary and s...

Hey Community, Am I blind or doesn't exists Release Notes for UCS 2.2 (1d) and newer?http://www.cisco.com/en/US/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.htmlIf I open the release notes for 2.2, only information about 2.2(1b) and 2.2(1c) is...

Hello, I was looking for a recommendation of which parts I should be looking at for buying a UCS system to run just a few virtual machines and a catalyst switch that has the WLC capability. This is for a test environment to play around with ISE and P...

Anyone know how to avoid this error?

 Hi Guyz,we have C420M3 server with VIC 1225 connected on PCIe slot, with Fabric Interconnet.After installing OS & drivers , vNICs created on VIC 1225 by service profile appear, but 4 gig ports on Server LOM dont appear. Any Idea.? Thank

Hi All,I have B420M3 4CPU's w/1240+Port Expander+1280+ IOM 2208+ESXi 5.5based on my understanding I should get 40GB+40Gb+40GB+40GB=160GB total bandwidth per blade, see attached diagram.How many vNICs should be created in the service profile in order ...