I have a device connect to e2/3, from UCS cli, how would I know whether this is B-series server or c-series server? how would i know this device support ethernet or FCOE, if the port mode is vntag, can i say it support FCOE?
I have a device connect to e2/3, from UCS cli, how would I know whether this is B-series server or c-series server? how would i know this device support ethernet or FCOE, if the port mode is vntag, can i say it support FCOE?
I associate a service profile template to the chasis, is it enough to pre-provision the cisco ucs chasis?
Hi All, I tried to map virtual media on UCS using NFS i got the below error in the logs . As recommended we tried the green button please see the screen shot attached I checked in the CIMC logs below is the error ncutil.c:105:[ncPing]libnc: n...
Hi guys, I finally got a chance to try and play with Vmware Virtual Volumes (VVOL) today (available in vsphere/vcenter 6.0) and discovered that the UCS doesn't seem to support it.I have a Nimble storage array (think SmartStack) that is running the ...
This has me stumped. 6248UP FIs, 5108 chassis with 3 B200M4 blades running recent ESXi, 3.1(1g) firmware thruout. One of the blades has mac stuck on at least one of the mgmt vnics. The stuck mac is a valid one in the pool, and was assigned at one po...
Have a customer that is thinking of upgrading their Fabric Interconnect from a 6100 to 6200 or 6300. Concern is that we are looking for a step process to do the migration and to move the database from one to the other. Does this document exist? Thank...
Hi Guys , We are about to create a new environment, and we want to do it in the best way. I know there are mainly two options for FI to Nexus 5K connections - let's call it "cross" and "straight" What is a "newer" topology ? And which benefit do i...
i got a c240 m4 server that after upgrading the firmware to 3.1(2e) will not see the boot from san path and now will not boot into the OS. any idea?
Hi, I'm planning to change the boot policy from SAN boot to local disk while decommissioning our old SAN storage. Can I change this in the Service Profile Template and reboot one server at a time to reinstall OS on it? I want to be sure that the chan...
Can Someone make me clear the Difference between Fabric Interconnect and Fabric Extender???
What is the UCS C880 M4 rack mounting system? The installation guide for C880 does not provide any information on the rail system. I'm preparing for receipt of one of these and would like some details in advance.
Dear AllRegarding Cisco Data center design i want to know some points regarding UCS service profile based on the following customization ,i have one chassis with 5 Blade server each will host 25 VM with total of 125 VM &the VM will reside on SAN sto...
Hi all, I changed the IP for my 2 fabrics. but after I did this I cant do ping from my ucs to my default gateway, my question is when I change the Ips from the fabric should I do any other change? This are the steps I did to make the change. UCS-A#...
Thankfully this is a lab environment.We implemented LDAP authentication but now we cannot access the UCS manager. Authentication attempts fail when using either native or LDAP authentication.Questions1. We haven't attempted console access but does ...
Hello. I am Taewoo Kim working as a UCS Engineer. My question is UCS 6248 support a mix media type? Like TwinX and 10G SR SFP in a Interconnect.. If yes, is there any FI reboot? and any documents?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-21-2025 07:35 AM | ||
05-20-2025 11:03 AM | ||
05-07-2025 03:02 AM | ||
05-07-2025 12:11 AM | ||
04-30-2025 01:15 AM |