I'm getting following error when trying to change FC Uplink port to FC Storage port. Error while configuring FC Port 3 as a FC storage port.FcEstcEp must be contained under SubGroup hierarchy for this platform: cannot contain: object of class fabricF...
Forum Posts
Hi all,I recently purchased a 6332 FI, Nexus n9k switch, and a 5108 chassis with 8 b200 m5 servers. I have 4 of the breakout cables that were used by the school when they had it deployed for training, and those I am running from Port 1 and 2 on the F...
Hello Cisco Community, I’m setting up a home lab using a Cisco UCS C220 M3 server and would appreciate some guidance on finding a compatible hypervisor. I’ve tried installing VMware ESXi (7.x and 8.x) and Proxmox VE 9, but both failed due to hardware...
HiI have 2 server BE6H-M5-K9 with esxi 7.0I need to upgrade cucm from 12.5 to 15.One requirement of these upgrade is to upgrade esxi from 7.0 to 8The actual version of the CIMC BIOS firmware version is 4.1(2a)So I use the cisco UCS Hardware and Softw...
Resolved! 2-port 32GB FC HBA for C240M6
Hi, Speccing out a M6 server and struggling to comprehend the difference between the UCSC-PCIE-QD32GF (QLE2742) and the UCSC-P-Q6D32GF (QLE2772), other than the obvious 2742 vs 2772, which appears to mean nothing. Can anyone shed some light? Will t...
Hello,I’m preparing to deploy a Windows Server 2025 Hyper-V cluster on a Cisco UCS X9508 chassis, and I’d like to understand the best practices for this setup.In particular, I’d appreciate advice on the following points:Recommended firmware versions ...
Hello,I can't for the life of me remove the inner rails from this C240 M5. Can someone link a video or excerpt of documentation that explains how?Photos attached.
Hi all According to Field Notice: FN - 63943 - Memory Leak in UCS-C Cisco Integrated Management Controller (CIMC) Might Cause Memory Exhaustion for Systems with Extended Up-Times - Software Upgrade Required the work-around is Until the software is ...
Hello, Cisco Community.I studied working with UCS 6300 in gui. Initially, I had an ethernet port configured in vntag mode. A c240 server was connected to this port.As part of an experiment, I reconfigured the port in Apliance. I lost connection with ...
Hello on UCSC-C220-M7S, how do you get serial number of installed network adapter? both inventory-all and show network-adapter detail dont have serial number on it I can't them find on cimc gui either Thanks
Hello FreindsPls post me the download Link for the BIOS Upgrade file & the CIMC Firmware Upgrade file for UCS C220 M3 AND UCS C240 M4 S2Thanks a lotIbrahim
Resolved! Firmware Upgrade
Cisco UCSM running B200 M5'sToday I was performing infrastructure and server firmware upgrades. My upgrade was going from 4.3(2f) to 4.3(3c). The infrastructure upgrade was successful. After creating my new host firmware package and modifying my u...
Hello Freindsas per the below CPU Specs , 12 Cores=24vCPU , the Question is does the 24vCPU shared between VMs ,aka VM1 Consumes 16vCPU & VM2 Also Consumes 16vCPU ?thanks
Hello FreindsI have only 1 CPU in my UCS C240 M4 S2 Lab server, i need to add another CPU-2 , what do i need to order ? aka part -number for CPU , FAN ,SCREW , tolls , etcThanks a lot
Hello FreindsDoes the UCS C240 M4 S2 support/recognize RAM DDR4 32GB UDIMM?Thanks a lot
