Voice Systems and Accessories - Small Business

Hi,I've faced up a issue on 136 Cisco SPA504G with firmware 7.5.2 and 7.5.4, which I wish  to share with you in order to get help from you.In one moment, we started to receive claims from our users who were saying " they couldn't dial nor received an...

We have some SPA504g phones that often handle multiple incoming calls on a single line. If a second call begins ringing while the phone is on a call, and the call is then answered, the soft keys are blank for the second call. The softkeys defined for...

I have had no luck in finding why my red light (voicemail) on the top of my SPA942 will not go out. I check and delete all messages, but it remains. I thank you very kindly for any opinions that wish to be shared

hello guys, I've got a cisco SPA525G2 with firmware 7.6.1 and bt firmware up to 0.00.34 which is sometimes locking when Bluetooth is used with a iphone. Sometimes I can't hang up a call, I must disconnect the phone... Phone is used in SIP. Could it...

Hi All,    I am in the process of installing cmterm-devicepack8.6.2.26169-1.cop.sgn on our CISCO Business Edition 3000 8.6.4.10000-15 in order to add support to 7821 phones. But during the installation I get the following error. I have already instal...

We are using the Cisco SPA122 as an external MOH device. The issue that we are having is that when we have multiple people on hold at once they can hear each other. The music will be playing in the background but they can talk to each other. I have r...

Hi, I have IOS version 15.1(4)M7 for my UC560 system but i was wondering if Cisco have the file for the version M10? Thanks for your help, Simon

call from port 1 or 2 (L1 or L2) call from port 3-8 (L3-L8) Why IP address does not match the IP address of the gateway? It can be fixed?

Hello, I am trying to configure an external directory with SPA8841 phone but I cannot get it to work. In the phone configuration file (SEPmac.cnf.xml), I have the following configuration:   <servicesURL>http://172.16.171.17/cisco/services.xml</serv...

We recently purchased a BE6000S (10.6?) to migrate away from our CCME w/ CUE, and I am not sure where to start.  The ordered SmartNet contracts have not been delivered, but I need to deploy, and I'm stuck at the very beginning.  The Installation Guid...

I have MeetMe setup and working in my system. We can currently start a conference from any IP phone or analog phones connected to VG310/VG320 gateways. We have several SPA devices using SIP in our environment. Is it possible to start a MeetMe confere...

I have two 7941 phones.  The person who added 2 new 7941 phones to the network configured the ephone numbers with 25 and 26, but he configured the Button numbers opposite, so the ephone 25 has the button number 26 and ephone 26 has button 25. I thoug...

I have an Office where I've deployed 17 SPA504G along with Dell workstations.  Everything seems to be fine except for a few people who have need to VPN out to another client. When they do so, the throughput drops greater than 50 percent creating a pe...

We have a network of about 9 phones, and one of them got "frozen" on line 2 and will not unfreeze. It appears the line is in use, but it isn't and we don't know how to get it free. It has done this in the past flashing yellow/orange, but stops after ...