Voice Systems and Accessories - Small Business

So does anyone have or know of the real situation with windows 8 and office 2013 and if Cisco will release updates to support this new software?           We are ready to start thinking about upgrading some users but i dont want to loose functionalit...

I'm using my UC540 as the DHCP server.  How do i determine what devices are connected to the UC540 and what IP address is assigned to each device?thanks for your help.

Now that the SR520 as well as the SA500 series are EoL/EoS, what is the officially supported equipment (ie. configurable through CCA) for small teleworker and remote offices using the UC500 SBCS system? Is it the ISA500?

Hello Cisco teami have a question for the firmware colleagues, of the IP Phone SPA509G.I have here in Germany the following problem with the Provider TELEKOM:when i call directly from the Personel Directory of Cisco IP Phone SPA509Gto the SIP gateway...

Hello,Is it possible to have the phones ring with a different ring tone for Internal calls?I have tried googling but have come up with nothing.

hello,how can i know the version of cisco call manager of my system UC520? thanks

Hey All,We are doing our trial run at the moment before going all out with a new UC500, we are just trying the server software along with the Smart CallConnector Advance client.Out of the 4 computer we installed our CallConnector so far, 2 of them in...

When I try to ping a UC540 from the Internet (so pinging the WAN side), I just get "Destination net unreachable."I realize this is probably part of a security measure, but sometimes it would be handy if the unit would respond to ping requests.Is ther...

hello,i want to know if i can add a mobile number to my system UC520 as an intern number and change a free calls between them? thanks

Hi,I've got a user that has forwarded his phone to his cell phone.The forwarding and everything is perfectly fine, but the caller ID he is seeing on his cell phone is somewhat messed up.Therefore, if he misses one of those diverted calls on his mobil...

Hi All, Please suggest me what will be case for restarting all telephone while on call. I am facing this case in UC560 with 4 FXO port and 8 extension .Regards Rinchuraj

Hey,I have a SPA303, I was using it with just one phone line but now I need to add a second one, so I configure it, here how I did it, from the http://IP/admin/advanced WUI I configure the EXT1 and EXT 2 like this:Ext1Proxy and Registration:Proxy: si...

Hi everyone, i need some help with a scenario.I have 5-6 staff that share two workstations in a factory to log on and check their email. they do this everyday. some staff are not always in, but usually there are atleast 3-4 of the 5-6.I want each mem...

HiPlease can I have the complete xml schema for SIP trunks so I can create a proper template?Exporting from CCA 3.2.2 gives me an incomplete and sometimes inaccurate xml fileexample: toll fraud protection  - I would like to add this in to the templat...