Multiple phones spa504g 7.6.2b are losing registration many times per day.2 locations , 1 with 21 phones and 2nd with 35 phones both behind nat (dd wrt) registering to asterisk 13.17.1 on the external serverEach phone is configured to use deferent s...
Forum Posts
Hi,I'm sorry about my English (I'm French). I have a problem when a try to send fax with a SPA112. The fax dials the number and the distant fax drops out but the carrier is not complete and the fax is not passed on. I have a return no answer, occupie...
Is there a way from the phone itself to check firmware version once you have done a factory reset (#123456789*0#)?We have purchased these used and they were locked ICL/ITL, I reset them using said method and now they are stuck in upgrade because the ...
Hello all,I'm having some issues provisioning Cisco Small Business Phones (SPA Series). The filenames requested from the TFTP server are not consistent, and I haven't been able to find this behaviour documented somewhere.The issue is some units reque...
Hi, I have a strange behavior on my cluster monitoring, from time to time I see the RTMT "Cisco Jabber Summary" counter graphics going to "zero" and coming back to normal values, this is not important but it seems to be that at the same time the LDAP...
SPA 303 and 504G SRTP issueHi,I have a problem that when SRTP mode is enabled on SPA 303 and 504G answer "488 not acceptable here" on incoming INVITE. SDP of incoming INVITE:v=0o=FreeSWITCH 1505106066 1505106067 IN IP4 38.108.164.66s=FreeSWITCHc=IN I...
I have an elderly customer who is having problems dialing out because the dial plan timer on her SPA112 is not long enough. I'm having difficulties increasing this.To try to fix this, I added a "P20" to the beginning of the Dial_Plan_1_ string.(P20|...
the pap2-na ask for password in the process of reset, after the 73738# and i need the password, plz help
Hi!I have a problem.Hardware and configuration:I have a router TP-Link TL-MR3420 with 4G USB Modem Key and Cisco SPA112 connect. I have config ATA with Messagenet provider with this guide: Here.I setup the Line1, the line 2 isn't use. Attach on Line1...
Just got a new SPA-942 yesterday, which comes with firmware 5.1.15 (suprise. consider the phone is manfactured on 09/2009). the firmware 5.2.5 upgrade process brought the phone to PhoneInRecoveryMode.I tried rec-SPA942-5-2-8.exe and rec-SPA942-6-1-...
hello,I have installed Asterisk 11.25.1 on unbuntu 14.4 locally and it is working fine. I am able to register softphones without any problem. I bought a refurbished Cisco SPA504G with software version 7.6.2 recently. However, when i tried to regist...
I seem to have a problem with the Message Waiting inticator on my phones. I have bought two SPA112's and they both seem to have the same problem with different phones.Basically, when someone leaves a message, the MWI turns on on the phones attached, ...
This has been ongoing since I purchased this device. Sometimes it works fine but mostly when the phone rings, I pick it up and it crashes, line lights go out and it resets. This is the error Jan 1 00:00:05 SPA112 kern.err [17179569.420000] physmap-f...
I have the cisco spa112 ATA and I'm trying to update the firmware; https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/csbpvga/spa100-200/release/source/spa112-122-rn-1-4-1-SR1/spa112-122-rn-1-4-1-SR1.html, but I cannot find any info on ATAs with a S...
I have several phones on multiple networks locking up (freezing). I have read several posts about the SMB phones locking up issue and it seems that there hasn't been much in the way of reproducing this problem. I've been able to replicate the lock ...
