VPN

hi,i have one of the most basic configurations on a PIX 525 with remote access enabled. i am able to connect from a desktop machine running the cisco vpn client but for some reason i cant get my iphone or ipad to connect to my vpn. i get the error me...

HiWhat is the Cisco 881G "PDP establish max timeout"? The Cisco 881G 3G connection is to be disconnect by PDP establish max timeout. I want to infinite to establish this connection. What parameter I can adjust?

We have a single CISCO2921/K9 and less than 10 spokes (all 881).  Today, abruptly, all of the spokes lost connectivity.  I'm really out of my element with this as I didn't implement this solution and maintaining it is not my responsibility.  I only h...

Hi all,Recently, I'm helping my client to setup a remote access vpn to the Cisco ASA 5510 to access public internet the objective is to bypass their own local firewall. Remote access vpn is working fine, VPN client connected and able access Internet....

Hi All,I currently run a VPN to a third party. We dont have any issues with the communication generally and I've tested traffic to the web application from user PC, through the firewall and to the appliocation itself. A TCPING shows a timely connecti...

i just bought a cisco 2921 ios::c2900-universalk9-mz.SPA.150-1.M2.bin, but the "crypto isakmp" command could not be executed. the only license i have is ipbase. ---Posted by WebUser Rashed Musharaf from Cisco Support Community App

Hi Can't enable SSL VPN on my 887VA K9 ?This is what I get in CCP"Technology License (SSL_VPN) associated with this feature is not deployed on this router. Use the link below to deploy the technology license"The license key installs fine - I just can...

Hi,Currently we are authenticating user by below 2 methods, please advise that is this sufficient security/ best practice or do you recommend extra security.1) Corporate User ONLY: Anyconnect User Authenticate against AAA(Radius), then in ACS we have...

HiI was wondering is someone can help me with this. I have set up my 2509 access server. I think i have the setting right. When i go to connect to a device the access server just hangs. I do a ctrl+shift 6 x and it lets me out. I do a show sessions a...

Hi, i´ve try to get an dynamic VTI with VRF Aware on the HUB Router and PKI for Authentication.My Problem is, that Phase1 works fine, but Phase2 doesn´t came up.debug crypto isakmp Feb  7 09:46:09.439: ISAKMP:(20175): IPSec policy invalidated proposa...

Should I be adding a static route in the local router for the remote LAN to be reached via the opposite tunnel address or let BGP take care of that?Example:R1#!                  interface Tunnel0description GRE tunnelbandwidth 1536Keepalive 10 3ip ad...